Almi A010.00085 AL65KS Easy stone cutter galvanised

Almi A010.00085 AL65KS Easy stone cutter galvanised

Features

• After many years of development, the AL65KS has finally been given the new 'EASY' look.
• This means that this new limestone cutter also has a single spindle, which makes it 20 percent lighter than its predecessor and similar cutters from other brands.
• The new AL65KS EASY from Almi is, of course, completely galvanised.
• This means that the AL65KS EASY cannot rust.
• And that's a good thing in our rainy climate.
• The AL65KS EASY excels in ease of use.
• With the greatest of ease you can cut large sand-lime blocks to size.
• If you position it vertically, the roller track makes this sand-lime brick cutter ideal for cutting large sand-lime brick elements that need to be moved by crane.
• If you put the AL65KS EASY upright, you can cut the element at any angle.
• Despite the fact that the AL65KS EASY is a heavy-duty machine, this sand-lime brick cutter is easy to operate.
• For example, you can adjust the Cutting height: very quickly using the single spindle.
• The two extra large supporting plates are secured using the adjustable support legs and you lay the sand-lime brick or kerbstone on these plates.
• Then you pull the extendable lever and your block or tire is cut to size.
• As you may expect from a Dutch product, the quality is guaranteed.
• The spindle is carefully sealed so that no sand can get between them.
• In addition, both blades have four cutting edges.
• That way you can just flip them over when one side is worn out.
• Furthermore, all Almi stone cutters are produced on a robotic welding cell, guaranteeing a quality product.

Technical data

• Fixed blade
• Cutting height: 1-40 cm
• Cutting width: 65 cm
• Weight: 118 kg
• Suitable for clinkers, large tiles, sand-lime bricks, curb stones, use in vertical roller conveyor for large sand-lime bricks