Einhell 4173118 GC-WW 6036 Hidrobox Pressure Pump

Einhell 4173118 GC-WW 6036 Hidrobox Pressure Pump

The Einhell GC-WW 6036 is a powerful and practical hydrophore pump that can serve you in a wide range of pumping activities. For example, use the pump to transport clear water from cisterns, wells and shafts. This way you can supply watering systems, toilet flushes and similar machines. To offer a large delivery capacity, this Pressure Tank Unit is equipped with a powerful 600W motor. This motor provides a delivery capacity of up to 3,600 litres per hour, a head up to 40 m, a suction height up to 8 m and a maximum operating pressure of 4.0 bar. It is recommended to use the Pressure Tank Unit with clear water, which is not warmer than 35° Celsius. A long working life of the machine is guaranteed by a steel tank/pressure vessel with a capacity of 20 L. The machine has a solid suction and pressure connection on the pump housing, to which hoses can be very seamlessly connected. The suction connection is suitable for hoses with a diameter of 33.3 mm (1 inch female thread) and the pressure connection for hoses with a diameter of 33.3 mm (1 inch female thread). The machine has an integrated pressure switch that activates the pump when the pressure becomes too low and switches it off when there is sufficient pressure again. So you have sufficient reserves for the hydrophore pump a long time to use. After using the machine, the accumulated condensate in the tank can be removed from the machine via a water drain plug. The tank can be filled before use with an easily accessible water filler plug. While using the machine, you can keep an eye on the operating pressure via the integrated pressure gauge on the hydrophore pump. The pressure is then adjustable via the pressure switch on the hydrophore pump.

Features

• Includes pressure switch for automatic control
• Integrated pressure gauge
• Capacity tank/pressure vessel: 20 L
• Separate water filler plug for easy starting
• Drain plug for residual water
• Permanent water supply in the house and garden with constant pressure
• Stable stand with drill holes for ground fixing

Specifications

• Power supply: 230 V | 50 Hz
• Power consumption: 600 W
• Max. Supply capacity: 3600 L/h
• Max. Head: 40 m
• Max. Printing: 4 bar
• Max. Suction height: 8 m
• Max. Water temperature: 35 °C
• Max. Switch-on pressure: 1.5 bar
• Max. Shut-off pressure: 3 bar
• Suction connection: 33.3mm (R1 IG)
• Pressure connection: 33.3mm (R1 IG)
• Tank capacity: 20 L
• Stub cable: 1.5 m | H07RN-F

Includes

• Hydrophore pump
• Manual