Einhell 4301180 TC-TC 618 Tile cutting machine

Einhell 4301180 TC-TC 618 Tile cutting machine

Features

• The Einhell TC-TC 618 Electric Tile Cutter is a compact, mobile machine for the precise cutting of wall and floor tiles, among others
• Thanks to the mitre and parallel stops, the machine makes mitre cuts and precise length cuts possible
• The large worktable of this tile cutter provides a secure support for guiding tiles of a large size
• The diamond cut-off wheel runs in a stainless water bath, which ensures continuous cooling of the cut-off wheel
• This tile cutter has a powerful 600 W motor, which enables it to perform a variety of tile cutting tasks effortlessly and with an optimal end result
• A diamond cut-off wheel is supplied with this machine
• This offers you the opportunity to get to work immediately with various tile cutting activities
• Use the large worktop of this tile cutter to effortlessly and safely cut tiles up to 35 mm thick
• At the edge of the worktable there is a robust holder, to place the tiles safely and firmly. To make the best use of your work surface of this tile cutting machine, there are a lot of adjustments that can be made to the table
• This makes it possible to rotate the work table vertically over an angle of 0° to 45° degrees
• An additional plastic holder allows tiles to be laid at an exact 45° angle
• This makes it possible to make very precise cuts with this tile cutting machine
• To transport the machine safely, there is a handy cable holder on the machine
• It is very easy to hang the power cable from this holder, when you put the machine away or transport it
• Work table tiltable to 45°
• With scale division/lock
• Water tank ensures a cold / clean cut
• Plastic feet ensure a safe stand and anti-slip
• The parallel stop ensures precise, straight cuts
• Scale for setting the cutting width
• The mitre guide helps with accurate 45° cuts
• The disc protector provides the necessary safety
• Cable winding option for tidy storage
• Mounting holes allow for attachment to workbench
• Includes 1x diamond grinding wheel
• Including tool for changing the grinding wheel

Specifications

• Power supply: 230 V | 50 Hz
• Max. Power (S2 | S2time): 600 W | 10 min
• Idle speed: 3000 min-1
• Max. Cutting height at 45°: 22 mm
• Max. Cutting height at 90°: 35 mm
• Diamond grinding disc: 180 mm x 25.4 mm
• Swivel range Grinding wheel: 45 °
• Beschermingsklasse: IP54
• Work table dimensions: 330 mm x 360 mm