Fischer 50256 Threaded Rod RG M 8 x 110 ev steel grade 5.8 10 pieces

Fischer 50256 Threaded Rod RG M 8 x 110 ev steel grade 5.8 10 pieces

The proven threaded rod for use with mortar cartridges or injection mortar indoors. The fischer threaded rod RG M is made of galvanised steel in the steel grade 5.8. The threaded rod is a system accessory for the various fischer mortar cartridges or injection mortar. For individual fixings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the fischer threaded rod RG M is applied by tapping with a rotary hammer. During placement, the mortar cartridge is broken up, mixed and the mortar mass is activated. When mounting with the injection mortar, the anchor rod is pushed into the drilled hole manually by light rotary movements. The system is particularly suitable for the efficient fastening of machines, steel constructions and supports indoors.

Benefits

• The wide range of RG M from M8 to M30 allows for a wide application spectrum and thus offers great flexibility
• The wide range of approved steel grades for RG M allows the use of all corrosion resistance classes and provides the greatest possible safety in applications
• Please note the approvals for the respective glass capsules or mortar

Characteristic properties

• In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete
• Threaded rods with beveled edge and 6-edge for easy assembly with pre-portioned glass capsule
• Galvanized steel for indoor use

Approval

• ETA-02/0024 DoP No. 0007 DoP No. 0007 - EN DoP No. 0072 DoP No. 0094 DoP No. 0094 - EN DoP No. 0756-CPD-0300 DoP No. 0756-CPD-0301 DoP No. 0756-CPD-0490

Montage

• Due to the chamfered jaws, the threaded rod RG M is particularly suitable for use in combination with the glass capsules
• The RG M threaded rod is inserted with a rotary tap using a rotary hammer and the corresponding assembly tool
• During application, the capsule is broken by the beveled edge of the RG M, mixed and the mortar is activated
• It is also possible to use injection mortar. The threaded rod is lightly turned by hand and pushed to the bottom of the borehole

Specifications

• Drill hole diameter d0 10 [mm]
• Wrench size (hexagon) 6kt SW 5 [mm]
• Wrench size (hexagon nut) SW 13 [mm]

Includes

• 10 pieces