Fischer 536266 Metal insulating plug DHM 130 A2 250 pcs

Fischer 536266 Metal insulating plug DHM 130 A2 250 pcs

The Fischer Isolation plug metal DHM A2 is simply pushed in with a hammer. This type of hammer installation is very quick and easy to carry out. Thanks to the R 120 fire resistance rating, it can also be used with high demands on fire resistance. The stainless steel version DHM A2 is suitable for applications in wet areas and outdoors. The insulation plug can be used, for example, to fasten stone wool and glass wool boards as well as wood wool boards.

Benefits

• The metal insulating plug achieves the fire resistance duration R 120. Therefore, it can be used when requirements for the fire resistance duration are made
• The DTM 80 soft insulation disc, which is available separately, simplifies positioning and reduces costs
• With the simple stroke assembly, application is extremely fast and less effort is required
• The shaft geometry ensures that the dish can be inserted into aerated concrete without pre-drilling, thus saving one work step
• The DHM is offered in a version made of hot-dip galvanized steel or of stainless steel A 2

Applications

• Concrete
• Lightweight concrete hollow block
• Perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• High density natural stone
• Cellenbeton
• Solid brick van lichtbeton
• Solid brick

Building materials

• The insulating plug is set with a hammer in push-through assembly
• The spring steel expands when hammered into the base material
• Use DTM 80 plate (sold separately) for fixing of soft insulation materials

Specifications

• DIBt approval : Relevant
• Borehole diameter : 8 mm
• Plough length : 170 mm
• Min. drill hole depth : 50 mm
• Useful length : 100 - 130 mm
• Min. anchoring depth : 40 mm
• Contents : 250