Fischer 539644 Construction collar plug S12 FUS 50 pieces

Fischer Constructiekraagplug S12 FUS 50 pieces

For mounting frame corners with a 13mm through-hole in limestone.

Advantages

• 2-fold spread allows targeted mounting near the edge.
• Extra-large collar prevents contact between bolt and attachment and thus corrosion.
• High-quality nylon ensures trouble-free and long-lasting operation in masonry.
• Diameter 12 mm ideal in combination with numerous steel angles in masonry and limestone UNIQUE IN THE MARKET!
• Safety screw with large core diameter provides additional spread and thus very high loads.
• Recommended load value in limestone: 1.5 kN!

Characteristics

• Specially tailored to anchor steel frame corners with through hole 13mm.
• Safety screw with large core diameter provides additional spread and thus very high loads.
• Extra-large collar prevents contact between bolt and attachment and thus corrosion.
• High-quality nylon ensures trouble-free and long-lasting operation in masonry.

Building Materials

• Solid lime sandstone, Solid brick, Aerated concrete.

Assembly

• Mark the position of the holes with a fusible link or laser.
• Drill the holes in the limestone.
• Insert the S12 FUS construction collar plug into the steel corner.
• Place the anchor in the drill hole, keeping in mind that the spreading forces work parallel to the edge of the limestone to prevent breakout.
• Tighten the anchor with a cordless screwdriver until the collar of the plug is slightly flattened, the use of an impact wrench is not recommended!

Technical data

• Plug length l 60 [mm]
• Drill diameter d0 12 [mm]
• Screw length ls 69 [mm]
• Min. hole depth for through-hole mounting h2 75 [mm]
• Screw diameter ds 7.0 [mm]
• Recording T40/SW13

Includes

• 50 pieces