Fischer 70008 Plug SX 8 x 40 with collar 100 pieces

Fischer 70008 Plug SX 8 x 40 met kraag 100 pieces

The strong nylon crankbait with quadruple spread and edge for optimal holding.

Description

• With its fourfold spread, the fischer Plug SX conducts forces optimally into the building material.
• In addition to the typical spread, the high-quality nylon used in manufacture also guarantees reliable and long-lasting fastening.
• The edge applied at the head prevents, that the plug slides into the drilled hole.

Advantages

• The 4-fold spread provides optimum force distribution in the material and offers high load capacity in solid and hollow building materials.
• The spreader-free plug collar prevents the generation of spreader pressure forces on the material surface during screw insertion.
• This prevents damage to plaster and tile work.
• The protruding collar prevents the plug from slipping into the drilled hole and thus enables easy installation.

Characteristics

• Optimal force introduction through quadruple spreading.
• This enables high fastening values in solid and porous building materials.
• Easy assembly: The edge of the plug prevents it from sliding deeper into the hole.
• No spreading pressure on the neck of the lure
• As a result, tiles or plaster will not be damaged.

Applications

• Lamps Motion sensors Plinths Letterboxes Latticework

Building Materials

• Concrete Perforated brick Hollow brick of lightweight concrete Floors of brick and concrete Perforated sand-lime brick Full sand-lime brick Natural high-density stone Aerated concrete Gypsum blocks Full brick of lightweight concrete Full brick

Assembly

• The SX with rim is suitable for front-pitch mounting.
• When the screw is screwed in, the SX spreads open in four directions, securely anchoring it into the material.
• The required screw length is determined as follows: length of the plug + thickness of the mounting piece + 1 x the diameter of the screw.
• Suitable for wood, chipboard and spacer screws fischer ASL.

Technical data

• Drill hole diameter d0 8 [mm]
• Min. drill hole depth h1 50 [mm].
• Plug length l 40 [mm]
• Chipboard screw ds / ds x ls 4.5 - 6 [mm].

Includes

• 100 pieces