Fischer 541897 Clamping sleeve FNH 6/60 100 pcs.

Fischer Clamping sleeve FNH 6/60 541897 100 pcs.

The assembly-friendly clamping sleeve for light fixings in solid materials. The fischer clamping sleeve FNH is an installation-friendly clamping sleeve made of steel with a corrosion-resistant coating. The clamping sleeve FNH is hammered into the fixing hole using a hammer, and then clamps over the full length against the wall of the hole. It enables low-cost fixing of timber and metal substructures, metal profiles and edge timbers in solid building materials, both indoors and outdoors.

Benefits

• No plugs or screws are required for the single tension sleeve
• This ensures easy installation
• Thanks to the geometry of the clamping sleeve, it can be easily pressed into the drilled hole
• This saves time and money

Characteristic properties

• Hit it with the hammer - done
• Fastening without screws or plugs
• This saves time and reduces costs

Applications

Timber and metal substructures Metal profiles

Building materials

• Concrete, Solid limestone, High density natural stone, Solid brick

Montage

• The FNH clamping sleeve is suitable for push-through mounting
• When inserting the clamping sleeve, it tightens against the wall of the borehole over the entire installation depth
• FNH is suitable for interior applications and for temporary fixings on the exterior

Specifications

• Drill hole diameter d0 6 [mm]
• Effective anchorage depth, lift 30 [mm]
• Plug length l 60 [mm]
• Max. thickness of attachment t fix 30 [mm]
• Min. borehole depth for through hole mounting h2 70 [mm]

Includes

• 100 pieces