Fischer 544154 Injection mortar FIS EM Plus 390 S 1 piece

Fischer Injection mortar FIS EM Plus 390 S 544154 1 piece

The strong injection mortar for reinforcement bars and cracked concrete. The fischer Injection Mortar FIS EM 390 S is a high-quality epoxy mortar with the best load-bearing capacity in cracked and uncracked concrete. In addition to the injection mortar, the injection system consists of reinforcement thread, the approved threaded rod FIS A, and the cast-in anchor with internal thread RG M I. The threaded rod FIS A can be inserted at various anchorage depths. This allows the system to be optimally adjusted to the load to be applied. And the use of the material is improved. The epoxy resin mortar can be used for both indoor and outdoor fixings, i.e. for filler concrete connections, high racking or heavy steel constructions.

Benefits

• The high bonding force and minimal shrinkage of the mortar allows high loads in cracked and uncracked concrete, even with large threaded rod diameters up to M30
• Variable anchoring depths from 4 to 20 times the diameter of the threaded rod allow an ideal adaptation to the applied load and optimal mounting and material use
• FIS EM is also approved for holes drilled with diamond-tipped drills and water-filled drill holes, which guarantees more flexibility on the construction site. The extensive range of approved steel types allows for use in all corrosion resistance classes and gives the best possible reliability of use

Characteristic properties

• Approved for retrofit rebar
• Approved for cracked concrete including seismic loads
• Installation in water-filled boreholes
• Fixation in holes drilled with hammer and diamond drills
• No borehole cleaning required when using hollow drill, this saves time

Applications

• Retrofitted reinforcing bars, Concrete-concrete connections, Sham edge anchors, Seismic applications, Anchorings in diamond-drilled or in waterfilled drill holes, Heavy steel structures, Silo installations, High scaffolding, Sound insulation walls, Temporary or removable fixings (with internal threaded anchor RG M I), Building materials
• Approved for anchorages in: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: High density natural stone The details (building materials, loads, etc.) of the available approval apply
• Approval ETA-09/0089 - Bewehrungsanschluss ETA-10/0012 ETA-10/0012 DoP No. 0012 DoP No. 0012 - EN DoP No. 0021 DoP No. 0079 - EN DoP No. 0088 DoP No. 0756-CPD-0324 ESR-1990 GS 3.2/13-104-1 Ä EPD-FIW-20130107-IBE-1DE Technisches Datenblatt

Montage

• The epoxy mortar FIS EM is suitable for front and side installations and can be used in combination with the threaded rod FIS A or the cast-in anchor with internal thread RG MI
• The resin and hardener components are stored in two separate chambers and are only mixed and activated when the injection cartridge is squeezed into the mixing nozzle
• The mortar is injected from the bottom of the borehole without bubbles
• The mortar sticks the fastener with its entire surface to the wall of the borehole, thus sealing the hole
• The fastener is applied by hand while gently rotating it to the bottom of the borehole
• In case of a push-through assembly, the ring gap between the threaded rod and the assembly piece is filled with FIS EM

Specifications

• DIBt approval
• Languages on label D, GB, F, NL, E, P
• Contents 1 tube 390 ml, 2 x mixing nozzles FIS MR Plus

Includes

• 1 piece