Fischer 050127 Plug S 10 DP double packaging

Fischer Plug S 10 DP double packaging 050127

Features

• The fischer spreader s is the original and has been a tried and tested classic for millions of years
• The plastic plug is 100% made of high quality nylon
• This makes the plug particularly strong during assembly and guarantees long-term safety
• Since the plug only spreads in two directions, the spreading forces can be applied parallel to the edge of the material by turning
• This prevents the material from crumbling when fastened close to the edge
• Wood or particleboard screws can be used for fastening the object
• The fischer spreader plug S is ideal for fixing in concrete and solid brickwork
• The installation-friendly nylon plug with 2-fold spread
• The plug without edge is suitable for front and backside mounting
• The plug can be easily plugged in for quick installation
• Twist protection prevents twisting in the drilled hole
• This guarantees a high degree of safety during installation
• The rimless plug sleeve makes it possible to set the plug as deeply as necessary under the plaster on the substrate and thus to achieve the maximum load-bearing capacity
• Since the plug only spreads in two directions, the spreading pressure forces can be directed in such a way that they run parallel to the edge of the building material by turning the plug
• This allows for smaller edge distances
• The slimline plug geometry allows the plug to be easily pushed into the drilled hole
• This allows for quick and easy installation
• Wings prevent the plug from rotating in the drilled hole, making installation safe
• The S plug is suitable for both front and rear mounting
• When the screw is turned inwards, the S-plug expands in two directions and thus offers a firm anchorage in the building material
• The required screw length is determined from the plug length of the plaster and/or thickness of the insulation material dike of attachment 1 x screw diameter
• Suitable for both wood screws and chipboard screws
• The edge distance must be at least one plug length
• When mounting near the edge, it is recommended to turn the plug so that the wings are parallel to the edge

Specifications

• Drill hole diameter: 10mm
• Plug length: 50mm
• Min. drill hole depth: 70mm
• Chipboard screw: 6-8mm
• Packaging Unit: Pieces

Applications

• Concrete
• Solid sand-lime brick
• High density natural stone
• Solid brick van lichtbeton
• Solid brick

Includes

• 100 stuks