Fischer 060669 Zykon Piercing anchor FZA-D 14 x 80 M10 D/20 A4

Fischer Zykon Piercing anchor FZA-D 14 x 80 M10 D/20 A4 060669

Features

• The fischer Zykon push-through anchor FZA-D is an anchor made of stainless steel
• In one work cycle, the back-cutting drill hole is drilled using the special FZUB drill bit
• The rear cutting anchor is placed in the piercing fitting
• With the installation aid FZE Plus, the spreader sleeve is pulled over the cone and completely fills the drilled hole which is cutting behind it
• The fischer Zykon push-through anchor FZA is ideal for securing façades, railings and steel constructions outdoors in cracked concrete
• The Zykon A4 stainless steel anchor for the push-through assembly in cracked concrete
• Maximum safety through appropriate connection
• Reduced edge and spindle distances due to zero pressure mounting
• Quick installation without changing tools
• This saves time and money
• For time-saving push-through assembly
• Made of stainless steel for outdoor fixings
• ZYKON''s special undercutting technology enables a tight fit and guarantees optimal safety, even with large cracks
• The anchor''s installation, which is virtually free of spread pressure, allows for small edge clearances and axial distances, enabling flexible use
• The FZUB special drill allows fast installation by undercutting without changing tools
• The geometry of the borehole allows a very low energy input and therefore reduces the energy required for installation
• The ideal interaction of bolts and threaded sleeve with FZA-D enables higher shear loads and therefore fewer fastening points
• FZA-D suitable for through hole mounting
• The undercutting hole is made using the special FZUB drill bit
• After placing the anchor in the borehole, the anchor sleeve is inserted through the cone using the FZED Plus assembly tool; the undercut borehole is filled with a positive form fit

Specifications

• Approval: Yes
• Drill required: FZUB14 x 80
• Required mounting device: FZE plus/FZE 14 plus
• Anchor length: 102mm
• Max. thickness of attachment: 20mm
• Draad: M10
• Wrench size: 17mm
• Packaging Unit: Box

Applications

• Concrete C20/25 to C50/60, cracked and uncracked
• Concrete C12/15
• High density natural stone

Includes

• 10 stuks