flextools 494534 GE 7 + MH-R + SH Giraffe sander for wall and ceiling with changing head system

Flex GE 7 + MH-R + SH Giraffe sander for wall and ceiling with changing head system

Description

• Electronics: constant speed, slow start, overload protection and speed control via rotary wheel
• Very convenient, lightweight machine with optimal operating comfort.
• Enables ergonomic work without fatigue
• Features innovative exchange caps that can be applied and removed with a single click
• Round sanding head for standard wall machining
• Easy to handle due to optimum balance between motor and sanding head
• Reliable power transmission and high flexibility thanks to the flexible drive shaft.
• Established "FLEX technology" for decades.
• Thanks to this construction principle, the weight on the head of the Giraffe® is kept to a minimum.
• This makes operation easier.
• The cardanic bearing of the sanding head ensures high flexibility and optimal adaptation to any slope and angle when sanding walls and ceilings.
• Dust extraction between brush ring and sandpaper prevents clogging of the sandpaper and promotes dust-free work
• Connection option for the FLEX safety vacuum cleaner with the FLEX clip system on the guide tube Dust-protected on/off switch
• Highly flexible through an optional extension (accessories) of 500 mm for large room height, can be mounted without auxiliary tools
• With comprehensive range of abrasives ideally suited for sanding gypsum board, heat-insulating styropor boards and preparation for spray work
• The processing of very large areas and room heights of up to 3.20 m is possible through the optional use of the GM 320
• With the innovative textile transport system, machine and accessories can be transported effortlessly.
• The Giraffe® requires no assembly, but is immediately ready for use

Technical data

• Power consumption 710 watts
• Power output 410 watts
• No load speed 1100-1650 /min
• Grinding disc Ø 225 mm
• Tool mounting velcro Inclination angle to head 100 °
• Length 1520 mm
• Cable length 5.0 m
• Weight 4.2 kg

Includes

• 1 segment sanding head MH-R 457.183
• 1 clip quick-release ring SH-FC 32 406.023
• Anti-static suction hose 4m diam. 32 mm with grid connection and connection socket for vacuum cleaner, with suction control 406.708
• 1 transport bag 408,867