Makita Accessories D-57065 Milling set 6mm 12-piece

Makita D-57065 Milling set 6mm 12-piece

Special characteristics

• The 12-piece router bit set is ideal for a woodworker.
• Due to the diversity of this router set, there is always a suitable router for the job.
• The cutters are delivered in a robust wooden box with a lock.
• The box inlay provides good protection for the milling cutters, transport and a clear storage of your milling cutters.
• The cutters are made of high quality carbide.
• This gives the cutters a long life.
• The cutters have 2 cutting surfaces per cutter.
• As a result, the cutters deliver a very tight and accurate finish.
• In addition, the cutters are ground at an angle, which makes them suitable for precise work.
• The cutters have a 6 millimeter shank.
• As a result, the cutters fit on any brand of (top) cutter with a 6 millimeter intake.
• In combination with an adapter, the cutters can also be used in cutters with an 8, 10 or 12 millimeter chuck.
• Adapters are not included with this router set.

Included

• The milling set consists of the following 12 milling cutters
• 1x copy milling cutter with bearing with a diameter of 12.7 millimeters and a length of 15 millimeters.
• 1x grooving cutter with a diameter of 6 millimeters with a length of 20 millimeters.
• 1x groove cutter with a diameter of 12 millimeters with a length of 20 millimeters.
• 1x groove cutter with a diameter of 16 millimeters with a length of 20 millimeters.
• 1x edge cutter with a diameter of 32 millimeters with a length of 20 millimeters.
• 1x edge milling cutter with a diameter of 22.2 millimeters and a radius of 6.3 millimeters.
• 1x edge cutter with a diameter of 28.6 millimeters and a radius of 9.5 millimeters.
• 1x chamfer milling cutter with a diameter of 32 mm and a radius of 45 degrees
• 1x V-groove cutter with a diameter of 12.7 millimeters with a length of 12 millimeters.
• 1 X Hollow profile cutter with a diameter of 12.7 millimeters and a radius of 6.35 millimeters.
• 1x Roman milling cutter with a diameter of 25 millimeters with a radius of 4 millimeters.
• 1x profile cutter with a diameter of 22 millimeters with a radius of 6.3 millimeters.