Makita DK0158G301 Combi Set - DF001G Cordless Drill + TW001G Impact Wrench + GA013G Grinder 40V max 4.0Ah Li-Ion

Makita DK0158G301 Combi Set - DF001G Cordless Drill + TW001G Impact Wrench + GA013G Grinder 40V max 4.0Ah Li-Ion

Now a total of 5 years warranty on Makita Machines

on top of the Makita factory warranty (3 years after registration with Makita) you will receive an additional 2 years TOOLPLUS warranty from us. ToolNation TOOLPLUS Warranty: 2 years extra toolplus warranty on power tools

Features DF001G

• Extremely powerful for heavy-duty drilling/screwing jobs with larger diameters
• 2 functions: screwing and drilling
• If there is a sudden reduction in speed or if the drill jams in the material, Active Feedback Sensing Technology (AFT) comes into play and switches the machine off
• Equipped with electronic slip clutch with 21 positions in high speed and 41 positions in low speed
• Wheel in base for quick digital adjustment of the desired torque
• Powerful machine but compact in design
• Suitable for outdoor use, through eXtreme Protection Technology (XPT) better protected against the penetration of dust and moisture
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control
• Durable thanks to protection against overloading, overheating and deep discharge of the battery
• Comfortable to use thanks to good machine balance and the ergonomic, rubber-coated handle

Technical Data DF001G

• Platform XGT
• Connection/detail 13 mm chuck with spindle lock
• Drill head 1.5 - 13 mm
• Bolt/screw with wood thread 10x90 mm
• Cap. drilling in metal 20 mm
• Cap. Hose drill L 50 mm
• Cap. Cylinder head auger L 76 mm
• Cap. Hole saw L 152 mm
• Turning left, turning right
• Slip clutch positions 41 positions
• Adjustable torque range (approx.) 6.5 - 45 Nm
• Tightening torque soft / hard 60 / 115 Nm
• Variable speed control (switch)
• Number of mechanical revolutions 2
• No load speed (position 1) 0 - 650
• Idle speed (position 2) 0 - 2600
• Built-in lighting
• Aluminum gear housing
• Volt (voltage) 36 V
• Motor type BL motor
• Softgrip
• Battery protection
• Electrical rem

Features TW001G

• Impact wrench with 4 adjustable speeds for adjusting the torque to the workpiece
• Equipped with 3/4" square connection with friction ring and hole for locking pin
• 3 bolt modes: Prevents bolts from being overtightened and Auto stop mode when reversing
• Auto stop mode when reversing. Machine stops automatically as soon as bolt or nut is sufficiently loosened or can continue to run at low speed
• Equipped with variable speed control in the switch
• Equipped with maximum speed function, when partly pressing the switch the speed goes to maximum
• Digitally adjustable: all-round machine for heavy connections, with a wide range (M18-M30)
• Up to 1800 Nm strong
• Relatively compact and well balanced, therefore easy to handle
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control
• Durable thanks to protection against overloading, overheating and deep discharge of the battery
• With LED lighting for a better view of the work

Specifications TW001G

• Platform XGT 40 V Max
• Connection/intake 3/4" square
• Bolt/screw 4.6 metric 45 mm
• Bolt/screw 8.8 metric 30 mm
• Bolt/screw 10.9 metric 30 mm
• Bolt/screw 12.9 metric 27 mm
• Max torque (position 4) 1800 Nm
• Max. dismounting torque 2050 Nm
• Variable speed control (switch)
• Variable speed control (digital)
• Turning left, turning righ