Makita HR004GZ02 Combination hammer SDS-Plus 40V Max excl. batteries and charger in MakPac

Makita HR004GZ02 Combination hammer SDS-Plus 40V Max excl. batteries and charger in MakPac

Now a total of 5 years warranty on Makita HR004 Machines

on top of the Makita factory warranty (3 years after registration with Makita) you will receive an additional 2 years TOOLPLUS warranty from us. ToolNation TOOLPLUS Warranty: 2 years extra toolplus warranty on power tools

Features HR004

• Equipped with efficient BL motor that offers the power and performance of corded equivalent HR2811FT
• Equipped with electronics for constant speed and variable speed control
• Equipped with two interchangeable chucks: an SDS-PLUS and a quick-clamping chuck
• Ideal combi hammer for holes up to 16 mm, but can go up to 28 mm in concrete
• In combination with the dust extraction, the maximum drilling length including SDS-PLUS connection is 260 mm
• Very low vibration level due to Anti Vibration Technology (AVT), 7.0 m/s² when drilling in concrete (45% of HR2811FT)
• Combi hammer with three functions: drilling, hammer drilling and light demolition work
• Impact force (2.9 Joules) is equivalent to the corded equivalent HR2811FT
• With double LED lighting for better visibility of the work
• Drilling and dust extraction in one
• Suitable for outdoor use, through eXtreme Protection Technology (XPT) better protected against the penetration of dust and moisture
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control
• Durable thanks to protection against overloading, overheating and deep discharge of the battery

Specifications

• Platform XGT
• Connection / insertion SDS-PLUS
• Ideal drilling range (concrete) 4 - 16 mm
• Diameter concrete drill bit 4 - 28 mm
• Cap. crown drill 35 - 54 mm
• Cap. diamond core drill 32 - 65 mm
• Cap. drilling in metal 13 mm
• Cap. drilling in wood 32 mm
• Interchangeable drill head
• Drill head 1.5 - 13.0 mm
• Slagkracht (EPTA) 2,9 joule
• Number of adjustable chisel positions 40
• Variable speed control (rotary knob)
• Variable speed control (switch)
• No load speed (position 1) 0 - 980
• Number of strokes (position 1) 0 - 5000
• Volt (voltage) 36 V
• Motor type BL motor
• Afm. lxwxh 389x102x232 mm
• Constant speed
• Number of mechanical revolutions 1
• Turning left, turning right
• Battery protection
• Slipping clutch (safety)
• Built-in lighting
• Softstart
• Electrical rem
• Softgrip

Includes

• Drill head quick-clamping 1,5-13mm 199139-5
• Depth stop with 6k teeth 331886-4
• Cleaning cloth 443122-7
• Dust extraction DX14 191E60-4
• Transit sleeve DX 424474-5
• Supplied without batteries and charger
• Makpac 4 821552-6