Metal Works 722316581 WEL22 Electric heater 22kW 3x400V

Metal Works WEL22 Electric heater 22kW 3x400V

Special Features

• Electric heater 22 kW on 3 x 400 V
• Suitable for heating large areas up to +-180 m², such as workshop, warehouse, offices, stores, etc.
• Suitable for heating rooms up to 1276m³, depending on the insulation and ventilation of the room. The better the insulation value of the building elements (lower K-value), the larger the space you can heat.
• maximum heatable volume of 1276m³, at a K-value of 0.5: in case the building is well insulated according to recent building standards.
• Minimum heatable volume of 250m³, at a K-value of 2.5,: in case the building is not insulated, with single glass, full stone walls, roof with old corrugated iron, or for rooms where gates open regularly.
• Built-in thermostat with control knob
• Multi-position switch with also a fan mode
• IPX4 splash-proof for use in wet areas
• CE approved
• Supplied without cable. The connection plug (63A) is on the back of the unit. Provide a cable long enough for your application, and thick enough to deliver the high power
• Attention: this device operates on 3 x 400 V and requires a suitable fuse, heavy enough to supply the high power

Advantages

• Does not consume oxygen and does not emit moisture or odors. Suitable for heating areas where there is no ventilation and people are at work
• High quality stainless steel resistance
• Thermally protected against overheating
• Powder-coated steel housing and plastic handle prevent rusting

Technical data

• Heat output kW 22
• Heat type Ventilated air
• Energy source Electric
• Thermostat Yes
• Total consumption W 145/1100/22000
• Power consumption kW 22
• Heatable space m³ 1276
• Voltage V 3x400
• Frequency Hz 50
• Fuse on the mains A 40
• Noise level dB(A) 59
• Mobile Yes
• Weight kg 19.20
• Dimensions (l x w x h) mm 430x430x600

Scope of delivery

• In box