Optimum 713425006 OptiTurn TU2506V Lathe 230 Volt Vario

Optimum OptiTurn TU2506V Lathe 230 Volt Vario

High precision lathe for the demanding user.

Description

• Induction hardened and precision ground prism bed guides
• Guaranteed concentricity accuracy of spindle nose better than 0.009 mm
• 4-stage variable speed control via frequency converter from 30 - 4000 min (only for Vario model).
• Digital display of spindle speeds (only for Vario model).
• High and precise finish
• Smooth-running feed drive with rounded gears, running in an oil bath.
• Selector switch right - counterclockwise - Separate emergency stop and separate start/stop button
• For flat turning, longitudinal turning, cone turning and thread cutting.
• Roller-rolled trapezoidal guide spindle is supported by 2 sintered bearings.
• Tapered roller bearings in quality class P5
• Thrust bearings
• Strong ribbed prism bed made of cast steel, induction hardened and finely ground.
• Chuck shield with microswitch, solid chisel shield and nice splash guard
• Loose head can be shifted +- 5 mm for turning cones.
• Due to a change wheel set a large range when threading.
• With a feed shaft for thread cutting or automatic longitudinal turning.
• Powerful, maintenance-free motor. - Constructed according to DIN8606.
• Other voltages possible on request 3x220V/50Hz and 3x440V/60Hz
• Note: 3x220V = power current (motive power). This is not the same as 1x230V mono = alternating current.

Technical data

• Voltage V 1x230
• Engine power kW 1.5
• Center height mm 125
• Center distance mm 550
• Turning diameter above bed mm 250
• Turning length in the bed bridge mm 135
• Bed width mm 135
• Number of speeds 4 stepless
• Spindle speed min-1 125-2,000
• Spilkonus MK 4
• Spindle bore mm 26
• Longitudinal feeding mm/O 0.07-0.2
• Thread cutting metric M 0,2-3,5
• Thread cutting inch Gg/1 56-8
• Driveway chisel slide mm 70 70
• Travel path cross slide mm 110 110
• Height of chisel holder mm 13 13
• Konus loose head MK 2 2
• Heading loose head mm 65
• Weight kg 125.00
• Dimensions (l x w x h) mm 1,200x640x580

Includes

• Chuck with 3 claws 125 mm
• Fixed center point MK2
• Fixed center point MK4
• Manifold - Chuck and chisel guard, splash wall and chip tray
• 4-fold chisel holder
• Change wheels set
• Operating keys
• Collection protocol
• Dutch language manual, markings, CE mark, and CE certificate according to Machine Directive 2006/42/CE, Low Voltage Directive 2006/95/CE and EMC Directive 2004/108/CE