Optimum 713427200 Optiturn TU3008 Metal lathe 800 mm 400V

Optimum Optiturn TU3008 Metal lathe 800 mm 400V

Special Features

• Induction hardened and precision ground prism bed guides
• Guaranteed concentricity accuracy of spindle nose better than 0.009 mm
• Rounding accuracy of the chuck better than 0.04 mm
• High and precise finish
• Strong ribbed prism bed made of gray cast iron, induction hardened and precision ground
• Smooth-running feed drive with rounded gears, running in an oil bath.
• With a feed shaft for thread cutting or automatic longitudinal turning.
• Automatic longitudinal / transverse spindle drive
• All guides are adjustable with V keys
• Selector switch right - counterclockwise
• Roller-rolled trapezoidal guide spindle is supported by 2 sintered bearings.
• Thrust bearings
• Loose head can be moved +- 5 mm for turning cones, with quick clamp lever and precision reading of 0.02 mm
• Prepared to install measurement rules

Trumps

• Large passage of ø 36 mm
• Both longitudinal and transverse feeding
• With powerful motor 1.1 kW
• Camlock spindle 4

Safety

• Separate emergency stop, separate start and stop button
• No-load voltage; low voltage operating buttons
• Microswitches in gearbox and chuck guards
• Large dimensioned chisel guard on arm
• Spindle and nut screw shielding

Applications

• For surface turning, longitudinal and transverse turning, chamfering, cone turning and thread cutting
• Home worker, garages for turning brake drums, training centers and schools, general maintenance, R&D department

Technical data

• Voltage V 3x400
• Power kW 1.1
• Center height mm 150
• Center distance mm 800
• Turning diameter above bed mm 300
• Turning diameter above slide mm 180
• Bed width mm 180
• Number of speeds 6
• Spindle speed min-1 150-2000
• Spilkonus MK 5
• Spindle nose Camlock DIN55029 Camlock No. 4
• Spindle bore mm 36
• Longitudinal feed mm/O 0.085-0.832
• Cross feeding mm/O 0.01-0.1
• Thread cutting metric M 0,2-3,5
• Thread cutting inch Gg/1" 56-8
• Driveway chisel slide mm 65
• Travel path cross slide mm 150
• Height of chisel holder mm 25x25
• Konus loose head MK 3
• Heading loose head mm 70
• Weight kg 260.00
• Dimensions (l x w x h) mm 1500x720 x690

Scope of delivery

• Chuck with 3 claws 160 mm
• Fixed center point MK3
• Fixed center point MK5
• Reduction sleeve
• Chuck and chisel shielding, splash wall and chip plate
• 4-fold chisel holder
• Change wheels set
• Operating keys
• Collection protocol
• Manual, markings, CE mark, and CE certificate according to Machine Directive 2006/42/CE, and EMC Directive 2014/30/CE.
• Tip: comes without base, don't forget to order this one with it 713440409.