Bosch Mania Month! | Extra discount on selected tools, While supplies last > Discover it now

Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology

4039976270311
Articlenr.
180016 R220
Expected delivery time 3 to 6 working days
RRP 3,127.39 Special Price 2,298.99 1,899.99 Excl. VAT
-26%
Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology - 1
Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology - 1 Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology - 2 Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology - 3
Product description

Rems 180016 R220 Picus DP Basic Pack diamond core drill with micro impulse technology

Compact, handzaam elektrisch gereedschap voor het kernboren, bijv. in beton, gewapend beton, alle soorten metselwerk, natuursteen, asfalt, alle soorten estrik. Met micro-impuls-techniek. Specially for dry drilling, handbediend of met boorstandaard. Voor vaklieden en industrie.

Features Picus DP

Specially for dry drilling

  • Driving machine with micro-impulse technology, specially developed for dry drilling, manual or with drill stand. Can be used everywhere, in difficult corners, close to walls, for many, especially hard, materials. For pipe and cable ducts, ventilation shafts, test core drilling. In combination with the REMS Pull M piston, ideally suited to core drilling in finished rooms, e.g. in residential, commercial or industrial buildings. Design Compact drive unit for low-vibration core drilling, with borehole connection UNC 1¼ outside, G ½ inside. Mickro pulse technology, can be switched on and off: The 24-tooth pulse wheel produces 28,800 pulses per minute at 1,200 rpm unloaded and 21,120 pulses per minute at 880 rpm loaded. Robust, suitable for the construction site. Super-light, only 7 kg. Easy, fast work without water, e.g. 200 mm in reinforced concrete Ø 62 mm in only 5 min. Practical spade handle and counter support for manual drilling. Integrated suction rotor for dust extraction with connection for REMS Pull M and other suitable suction devices. Clamping neck Ø 60 mm for holding the drive machine in the drill stand

Drive

  • Robust, powerful 220 W universal motor. Spindle speed under load 880 min-1. Stable, maintenance-free drive. Locking protection by safety slide clutch. Tip switch with lock

Multifunction electronics

  • Multifunction electronics met aanloopstroombegrenzing voor langzame aanloop voor gevoelvol aanboren, automatische onbelaste toerentalbegrenzing voor geluidsreductie en besparing van de motor, overbelastingsbeveiliging en blokkeerbescherming voor motor en aandrijving

Diamond core drilling crowns for dry drilling LS

  • Diamond core drilling crowns for dry drilling, laser-welded, heat-resistant (page 289), specially developed for micro-impulse technology, for waterless core drilling, manual or with drill stand. Thread connection UNC 1¼ in. Drilling depth 320 mm. Specially developed, high-quality diamond segments with high diamond content and special bonding for excellent drilling performance and particularly long service life. Ideal for dry drilling in reinforced concrete and masonry. Release ring for easy release of the diamond core cutter for dry drilling, as an accessory

Dust extraction according to EN 60335-2-69

  • When working with mineral building materials, e.g. concrete, reinforced concrete, masonry, screed, a high proportion of quartz-containing, health-damaging mineral dust (fi xed quartz dust) is generated. The inhalation of fi nger quartz dust is harmful to health. According to EN 60335-2-69, the use of a safety vacuum cleaner of dust class M is prescribed for the suction of harmful dust with a limit value for (occupational) exposure >0.1 mg/m³. Please observe the national regulations. Use REMS Pull M for powerful extraction of drilling dust from the drilled hole (page 294). The REMS Pull M safety vacuum cleaner is certified for suction of dusts that are harmful to health in dust class M

Drilling aid

  • Drilling aid G ½ TDKB, met gaten voor afzuiging van het boorstof uit het boorgat, met hardmetalen steenboor Ø 8 mm

Specifications:

  • Electric diamond core drill with microimpulse technology 2200 watts
  • Drilling without water in concrete, reinforced concrete ? Ø 162(202) mm, masonry and other materials ? Ø 202 mm, manually operated or with drill stand
  • Opname UNC 1¼ buiten, G ½ binnen
  • Integrated dust extraction
More Information
More Information
EAN 4039976270311
Ordernumber 180016 R220
Manufacturer Rems
Voltage 230 V
Warranty 1 year
Others also viewed
Trusted Shops Reviews