Soudal 117474 Soudafix Chemical Anchor VE400-SF 280ml

Soudal 117474 Soudafix Chemisch Anker VE400-SF 280ml

Features

• Good and easy to process
• Easy to apply
• Snelle uitharding
• Very wide range of application even in wet boreholes, underwater and down to -10°C
• Styrene-free, low odor
• Sleeve reusable by using a new mixing spout
• Waterproof and impermeable fastening
• High chemical resistance (chlorinated pool water and seawater)
• Fire resistance class F 120 (M8-M30)
• Emissions into indoor air class A+
• European Technical Approval option 1 for application in cracked and uncracked concrete

Toepassingen

• Anchoring heavy loads in solid building materials, medium loads in hollow building materials
• Tension-free anchoring in the edge area
• Can also be used as a repair mortar

Specifications

• Base: Vinylester styrene-free
• Consistentie: Standvaste pasta
• Curing system: Chemical curing
• Specific gravity: 1.77 g/cm³
• Temperature resistance: -40°C to +120°C
• Modulus of elasticity: 14000 N/mm²
• Maximum bending stress: 15 N/mm²
• Maximum compressive stress: 100 N/mm²

Gebruiksaanwijzingen

• Drill hole to recommended depth. - Clean drill hole by brushing and blowing out. - Screw the mixing nozzle onto the tube. - Spread the first 10 cm of the product on a piece of cardboard until the product is homogeneously mixed (uniform dark gray color). - Solid brick: Fill the borehole from back to front. Hollow brick: apply sieve sleeve and fill from back to front so that the product is forced through the openings of the sieve sleeve. - Apply anchor rod rotating left-right. - Check proper filling of the borehole. - Observe the curing time. Do not move the anchor rod in the meantime. - Allow excess product to cure as well. After curing, this can easily be removed mechanically with hammer and chisel. - Fixing the object.

Veiligheidsaanbevelingen

Observe usual work hygiene. Ventilate adequately in enclosed areas. See packaging for further information.