Spectra Physics 600450 HV101 Rotating finishing laser

Spectra Physics 600450 HV101 Rotating finishing laser

If you are looking for an affordable but reliable all-round finishing laser, the HV101 is just what you are looking for!

Horizontal and vertical alignment HV101

• This affordable entry-level model is suitable for installing walls or ceilings and for various finishing work such as tiling
• This finishing laser is an ideal aid for jobs
• The HV101 can be used both horizontally and vertically and features a tripod connection on both the side and bottom
• So if you need to place a wall directly after a suspended ceiling, just tilt the laser and you are ready to go!
• Highly versatile HV101
• The laser has a visible beam
• This makes it possible to use the Spectra HV101 without a receiver
• With the supplied remote control you can operate the instrument from a distance of up to 30 metres
• It is possible to mount the laser on a ceiling and operate it simply from the ground
• The supplied target plate makes height alignment even easier
• In short, optimal ease of use

Specifications

• Accuracy /- 3 mm over 30 m
• Diameter range Visible up to 60 m
• Range met HR320: 300 m
• Self-levelling Yes
• Self-levelling range /- 5 degrees
• Out-of-range warning Yes
• Laser stops rotating
• Tripod connection 5/8 plastic (2x, side and bottom)
• Power supply 2x D-Cell battery
• Rechargeable via mains power No
• Scan angle Five angles: 3°, 8°, 45°, 90°, 180°
• Carrying case Yes
• Drainage Yes
• Manual (between two known reference points)
• Dimensions 22 x 17 x 15 cm
• Weight 1,5 kg
• Working time 50 hours
• Chocolate-covered Yes
• Fall on concrete 1.5 m
• Water and dustproof IP54
• Laserbron 3R,
• Rotation speed Four speeds: 0, 50, 200, 600 rpm

Includes

• Suitcase
• Wall clamp
• Remote control RC601
• Target plate
• Rode laserbril
• Two D-cell batteries
• Clear manual in Dutch