Grabo TSPNEMOPRO Grabo Pro Vacuumlifter

Nemo Grabo Pro Vacuumlifter

Special characteristics

• GRABO Pro is equipped with a robust vacuum pump. The foam vacuum seal on the GRABO Pro tool is strong and resistant to vacuum loss. Once activated, the pressure pump creates strong suction and adheres securely to any non-porous, flat surface. The suction is strong enough to firmly hold even loads up to 375 lbs. To lift a sheet of flat, solid material, simply turn on the device and place it squarely on the surface. The GRABO Pro automatically monitors the vacuum and if the vacuum pressure is lost, the pump will automatically turn on until the vacuum pressure is restored.
• The GRABO Pro-Lifter The GRABO Pro-Lifter is designed with professionals like you in mind. Unlike the other large and expensive material handling solutions, the GRABO PRO is portable and reliable. Delivering on the promise of "Heavy Lifting - Made Easy", the GRABO Pro is equally effective on smooth and rough surfaces. So say goodbye to unreliable and often dangerous manual suction cups for work, because with GRABO Pro you can double your work efficiency without having to worry about losing suction power.
• The tool is ergonomically designed with a slimmer handle for better grip and less fatigue when moving heavy objects. Of course, the tool works perfectly with glass, wood, ceramic tiles, metals and other flat materials, but the tool is also an effective vacuum lifter even for dusty, semi-porous or rough surfaces. Like the classic GRABO tool, the PRO model comes with our four metal external anchor points for official and external attachments, opening up a world of lifting possibilities.
• The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that moment. The weight is displayed in both pounds and kg.
• The Pro-Lifter is equipped with a smart digital pressure sensor. This makes it even more effective on different surfaces. The lifting function is automatically activated and controlled at the simple press of a button. The sensor automatically provides the optimal level of suction, keeping objects in full control whether the object is lifted or even during movement.
• The digital display on the handle shows the applied pressure in bar and psi. With the pressure sensors you don't have to worry about switching the vacuum pump on or off. The automatic sensor is especially useful when lifting and moving coarse material. The sensors digitally detect and maintain the required pressure while transferring the lifted object. This ensures precise handling and installation without too much hassle. In any case, the sensor automatically stops the pump when reaching the maximum vacuum capacity of 11.6 PSI.
• However, if you want to lift and move objects of lighter mass, the vacuum pump can be turned off. When you want to remove the tool from the object, simply press the red vacuum release button.
• The tool runs on 14.8 volt 2600 mAh Li-ion removable battery. The battery takes two hours to fully charge. On a full charge, this powerful battery can run for 900 cycles or 1.5 hours non-stop. The battery lasts up to 30 days in standby mode.
• Just like the Classic model, the GRABO PRO is also equipped with four lifting eyes that are placed on either side of the handle. These cams are useful when the tool is to be used with additional grips or straps for support.
• The GRABO Pro has been thoroughly tested by professionals around the world. Given its compact design and competitive performance, the Pro Lifter is quickly becoming a tool o