Zircon 40032072 SuperScan K2 Wall scanner with metal scan

Zircon 40032072 SuperScan K2 Wall scanner with metal scan

Description

• Target Control™ (TC™) mode locates the center, edges and direction of wood studs, not metal, up to 19 mm deep below the surface. Identifies "safe to drill" areas between adjacent drywall screws, nails and protective plates.
• StudScan locates the center, edges and direction of both wood and metal studs up to 19 mm deep
• DeepScan™ locates the center, edges and direction of wood and metal studs up to 38 mm deep
• WireWarning™ detection warns of live unshielded AC wires up to 50 mm deep
• LoLevel™ indicator displays low (weak) signal objects, such as plastic water pipes, in TC™ mode
• Signal strength indicator helps distinguish between shallow and deep targets in StudScan and DeepScan™ modes
• MetalliWarning™ indicator illuminates when metal is detected in TC™, StudScan and DeepScan™ modes
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning is started over a sitjl
• Target Spotlight lights up on the screen when the target is detected
• ColorTrip™ screen is illuminated bright light blue in TC™ mode, green in DeepScan™ mode, blue in Metal Scan mode and red in AC Scan mode
• SpotLite™ Pointer shines an arrow-shaped light on the scanned surface to indicate the target location
• The " V"-marking groove enables accurate target location marking
• A battery voltage indicator for optimal performance

Technical data

• Type: SuperScan K2
• Max search depth: 3.8 cm
• Cable sorting function: No
• For searching wood: Yes
• For metal searching: Yes
• For searching plastic: No
• Max. detection depth of wood: 38 mm
• Max. detection depth of current-carrying line: 50 mm
• Acoustic signal: Yes
• Suitable for working under voltage: No