Zircon 69556 MetalliScanner MT X

Zircon 69556 MetalliScanner MT X

The MetalliScanner™ MT X is designed for locating metal in homes, commercial buildings and industrial building structures. The metal locator is calibrated to locate rebar to a depth of 10 cm. There are two scanning options to choose from, depending on the area you are scanning. Normal Scan for shallow rebar placed in tight grid patterns and DeepScan® for deeper pieces of pipe or rebar.

Features

• Use this tool to detect or avoid rebar in concrete before drilling.
• Large transflective LCD is clearly legible even in direct sunlight
• Center and signal strength Indication for metal up to 10 cm deep
• The battery strength indicator continuously displays the battery level and flashes when the battery level is too low for proper operation
• Ergonomic handle with patented Pivot Pinch handle
• Integrated marking system to mark the found location
• Includes swivel handle for easy scanning
• Water and dust resistant

Technical data

• Dimensions 238 mm L x 131 mm W x 72 mm H
• Weight 454 g without batteries
• Battery Type 3 AA Alkaline, required
• Precise Positioning*
• Center of #4 (13 mm) rebar
• with a minimum grid spacing of
• 15 cm, usually inside +/- 13 mm
• Depth* Up to 10 cm
• Operating Temperature -7 °C to 41 °C
• Storage Temperature -29 °C to 66 °C
• Humidity 5% - 90% RH non-condensing
• Splash Waterproof: Splash water tight, not waterproof

*NOTE: USE ONLY IN ACCORDANCE WITH MT X INSTRUCTIONS.

• The detection depth and accuracy can vary depending on the scanning environment conditions such as mineral content, moisture, texture and consistency of the wall materials.