Zircon 69864 MetalliScanner m60c

Zircon 69864 MetalliScanner m60c

The MetalliScanner™ m60c has two different scanning modes one to find metal and one to find active live wires in walls, floors and ceilings. The scanner has an advanced ColorTrip™ Display that is blue in metal scan and red in power scan. When a live wire is detected in metal scan the red light flashes to warn that extra caution is needed.

Features

• Metal Scan Mode mode detects Non Ferrous metal such as copper pipe to a depth of 38 mm and Ferrous metal such as rebar to a depth of 75 mm
  WireWarning® Detection indicates the presence of live, unshielded power wiring up to 50 mm deep in Metal Scan Mode
• AC Scan Mode locates live wires unshielded by metal up to 50 mm deep
• ColorTrip™ Display turns blue in Metal mode and red in electricity mode
• The dashed bar turns on when metal or an active live wire is approached
• Low Battery Indicator for optimal use
• SpotLite® Pointer shines an arrow-shaped light on the wall when the maximum detection value for voltage-carrying live wires or metal is reached

Technical data

• Dimensions 160 mm L x 80 mm W x 32 mm H
• Weight 203 g without battery
• Battery Type 9V Alkaline battery, required
• AC Scan Stand & WireWarning® Position Accuracy* 230V with 50Hz within a distance of 152 mm. Unshielded power wire
• AC Scan Stand & WireWarning® Depth*.
• In a normal wall with wiring, it can be detected up to 50 mm deep
• Precise Positioning*
• Metal Scan Stand: Normal within 13 mm when using the dual scan and marking procedure
• Depth* Metal Scan Stand: Up to 38 mm deep for copper, up to 75 mm for rebar
• Operating Temperature -7 °C to 41 °C
• Storage Temperature -29 °C to 66 °C
• Humidity 5% - 90% RH non-condensing
• Splash Waterproof: Splash water tight, not waterproof

*Note: Detection depth and accuracy may vary depending on scanning environment conditions such as mineral content, moisture, texture and consistency of wall materials. For indoor use only