CMT 916.080.11 Drilling and outlet cutter with guide bearing 8 mm shaft

CMT 916.080.11 Drilling and outlet cutter with guide bearing 8 mm shaft

• How much time is required to make openings in panels, drywall or joints, door windows, or to assemble pieces?
• This cutter makes short work of the time lost in certain evaluations for these tedious chores
• The striker goes in very quickly and the cutting head finishes carefully
• Safety advice: When working near electrical outlets or receptacles, do not drill too deeply so as not to touch the wiring
• Always work with the power switched off
• Like the model above, it penetrates veneer and laminated wood perfectly and produces cuts and edges quickly
• What makes this tool particularly special is the outer cutting area that is located under the guide and allows material to be removed from both sides
• The time gain is obvious
• The long-life carbide cutting heads are spaced 12mm apart and each head can process pieces up to 18mm thick
• High-grade widia steel
• 1 CUTTING
• 1 x frees

Specifications

• Milling length L=64 mm
• Milling cutter diameter D=8 mm
• Milling height I=19 mm
• Intake S=8 mm