Festool 576820 Cordless table saw CSC SYS 50 EBI-Basic

Festool 576820 cordless table saw CSC SYS 50 EBI-Basic + 5-year dealer warranty!

Now a total of 5 years warranty on Festool CSC SYS 50 EBI Machines(*)

(*) on top of the factory warranty from Festool, you will receive an additional 2 years TOOLPLUS warranty from us. ToolNation TOOLPLUS Warranty: 2 years additional toolplus warranty on power tools.

Sawing precision to take with you. The cordless table saw in the Systainer format.

The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. As enormously handy as its external dimensions are, the saw presents itself surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angled cuts of -2° to 47°. In the process, the unique digital control delivers highly precise results down to the tenth millimeter. The 2x18 volt dual-battery system combined with the brushless EC-TEC motor impresses with full power and pulling power. You won't notice any difference from mains-powered machines. Together with the UG-CSC-SYS undercarriage, you have the perfect work table right away, and transporting it from the vehicle to the place of use is effortless. In short: Sawing precision to go!

Special features

• Versatile: Parallel cuts up to 280 mm; crosscut cut width up to 450 mm. angle cuts from -2° to 47°
• Practical: at up to 35 mm cutting height, even angle cuts down to -10°; ideal for undercutting fitting frames
• Compact and mobile: transportable with one hand in the practical Systainer format. Even easier with the UG-CSC-SYS undercarriage.
• Highest precision: Via the digital display, height and angle are electrically adjusted at the touch of a button and accurate to the tenth of a millimeter
• Repeat accuracy: Height and angle adjustments (mm and inch) are made via the digital display parallax-free, i.e. more accurate than by sight. Repeat-accurate cuts are guaranteed
• Comfortable: Four saw blade settings can be stored and selected via the digital display
• Highly precise parallel stop: robust parallel stop with double clamping (via only one clamp) for precise alignment and perfect cutting results
• Zeer precieze hoekaanslag: Corner stop wordt via een groef op de schuifslede optimaal uitgelijnd en centraal vastgeklemd. Voor verstekhoeken tussen -70° en +70°
• Absolutely shock-free: ball-bearing sliding slides for parallel and angled cuts in highest precision
• Powerful: The brushless EC-TEC motor with high speeds of 6800 min-1 guarantees fast cutting progress and perfect cutting results
• Tireless: The combination of brushless EC-TEC motor and dual-battery system with two 18-volt batteries (from 4.0 Ah) ensures long running time
• Longevity: The brushless EC-TEC motor is extremely robust, durable and maintenance-free
• Work matched to material: With saw blades for every material the speed selection for material matched speed is done via the digital display
• Low dust: dust collection bag for low dust work even without a mobile dust collector
• Healthy work in system: Ideal also in combination with Festool cordless vacuum cleaners
• Combinable: with the complete Festool Systainer system and bott utility vehicle equipment
• Flexible undercarriage: The UG-CSC-SYS undercarriage is the perfect transport solution for the place of use and the ideal work table in one ( Optional )
• Unique: three-year warranty also on batteries and charging devices

Application highlights.

• Cross-cut cuts up to 450 mm width, precise and fast with the integrated sliding carriage
• Longitudinal cuts up to a cutting height of 48 mm and a width of 280 mm with sturdy support on the integrated folding table
• Angled cuts from -2° to 47° (-10° possible at limited cutting depths of 21 - 32 mm) thanks to the pivoting saw blade
• Exact height and angle adjustment by means of electric stepper motors. Adjustable to an accuracy of 0.1 mm and adjustable via display
• Practical transport in handy Systainer format

Technical data

• Battery voltage (rated voltage) 2 x 18 V
  
• No load speed 4 500 - 6 800 min-¹
  
• Mounting drill hole saw blade 20.00 mm
  
• Inclination angle -10 - +47 °
  
• Cutting height 0° 0 - 48 mm
  
• Cutting height 45° 0 - 34 mm
  
• Cutting height -10° 21 - 32 mm
  
• Miter angle 0 - 70 °
  
• Parallel cut width 280.00 mm
  
• Table height 228.00 mm
  
• Dimensions (L x W x H) 512 x 396 x 296 mm
  
• Dust extraction connection Ø 27 mm
  
• Drive type Battery
  
• Product weight without accessories 15.00 kg
  
• Transport weight with accessories 23.50 kg

Scope of delivery

• Circular saw blade WOOD FINE CUT HW 168x1,8x20 WD42
• Corner stop
• Allen wrench SW6
• Parallel stop
• Chip collection bag
• Sleeve knife with protective cover
• Sleeve blade for concealed cuts
• Safety push stick
• Supplied without batteries and charger