Fischer 80894 Insulation plug DHK 45/80 for rigid insulation 250 pieces

Fischer 80894 Insulation plug DHK 45/80 for rigid insulation 250 pieces

The Fischer Insulation plug DHK is an efficient plastic insulation plug for insulation boards with high pressure resistance. The DHK is tapped in with the hammer in the push-through assembly. When tapping in, the ribs tighten in the drilled hole and the DHK is optimally pressed against the wall. The Fischer Insulation plug DHK is suitable for anchoring insulation boards in solid and perforated brick, concrete and aerated concrete.

Advantages

• The improved geometry of the spreader allows for a low anchoring depth which also reduces the need for drilling
• Flexible pins in the plate section adapt to the insulation material and guarantee permanent contact pressure
• Easy stroke assembly allows for a quick assembly process and reduces workload
• The DHK 45 is suitable for use in pressure-resistant insulation boards and paneling.

Applications

• Concrete
• Hollow building block of light concrete
• Perforated brick
• Perforated limestone
• Solid limestone
• High-density natural stone
• Aerated concrete
• Solid brick of lightweight concrete
• Full brick

Building Materials

• The DHK is hammered into the through-hole assembly
• By tensioning the ribs in the borehole, the DHK receives the optimum pressing force
• Temperature in mounted condition: -40°C to +80°C.

Technical data

• Drill hole diameter : 8 mm
• Min. drill hole depth : 30 mm
• Min. anchoring depth : 20 mm
• Plug length : 105 mm
• Max. thickness of attachment : 80 mm
• Contents : 250