Gjerde 90043 1603-NO Construction saw 3.6 kW 400 Volt + 2nd Socket 2000 mm + input table incl. stop scale + mechanical brake

Gjerde 90043 1603-NO Construction saw 3.6 kW 400 Volt + 2nd Socket 2000 mm + input table incl. stop scale + mechanical brake

This very robust construction saw on power current is ideal for the most common sawing tasks on the construction site. By using the rotating blade, bevel adjustment and height adjustment with articulated arm, you can easily scallop, cut, mitre, double miter and rebate.

Optionally, this saw can be equipped with various feed and discharge tables, resulting in a very ergonomic sawing machine with which one can effortlessly saw long beam wood and panel material of large dimensions.

Supplied with an extra socket (4p/16A) in addition to the mains plug (4p/32A), for simultaneous connection of a wood dust extractor (Max. 1.1kW), feed table 2000 mm, aluminium stop and end stop

Standard equipped with:

• Wide bracket with passage width of 930 mm with transparent protective cover
• HM saw blade 400 mm, tiltable to 45° and adjustable to a height of 148 mm at 90° and to 90 mm at 45°
• Long guide track allowing the guide to be adjusted outside the table up to 930 mm from the saw blade
• Pivot blade adjustable to 105°
• Degree stop for quick adjustment at 0° - 45° - 90°
• Lifting arm for cutting and height adjustment (remains in position independent of the rotating blade)
• Motor with mechanical brake

Specifications

• Table top (LxW) 930 x 640 mm
• Working height table top 850 - 900 mm
• Transport height 1210 mm
• Machine weight approx. 140 kg
• Saw blade HM 400 x 30 x 40 TDS 
• Cutting width saw blade 3.5 mm
• Cutting height at 90° 148 mm
• Cutting height at 45° 90 mm
• Motor power 3.6 kW
• Supply voltage 400 V, 3 phases, 50Hz
• Nominal/Thermal protection 400V, 8.5A
• Motor protection temperature PTC
• Saw rotation speed 2300 RPM
• Saw shaft drive 3 V-belts
• Cutting speed, saw blade 300 mm 48 m/sec
• Riving knife Hardened steel 3.0 mm
• Machine wiring 7 x 1.5 mm2
• Connecting cable (max. 10 m) 4 x 2.5 mm2
• Fuse 16 A slow blow
• Workplace noise No load 80.9 dB (A) Loaded 84.7 dB (A)
• Dust extraction: Diam. under table top 100 mm On protective cover above 75 mm
• Throughput width 930 mm
• Saw blade angle adjustment 0° to 45
• Adjustment angle table top 105° ( 90° to -15°)

Includes

• Saw blade
• Tool set
• 2 pcs. pushbars
• Auxiliary guide
• 2nd socket for dust extractor
• Feeding table 2000 mm
• Aluminium stop
• End cap