Ridgid 76883 SeeSnake Mini Pro Inspection Camera

Ridgid SeeSnake Mini Pro Inspection Camera

Features

• The RIDGID® SeeSnake® Mini Pro is our newest TruSense diagnostic inspection reel.
• With our smallest and most rugged 25 mm self-leveling camera and medium flexible pushcable, the Mini Pro is designed to navigate through sharp 90° turns and inspect up to 61 m (200').
• When used with a TruSense-enabled monitor, the Mini Pro's innovative self-leveling technology produces the most stable line-of-sight without mechanical rotation.
• This greatly increases the life and durability of the camera while reducing service visits.
• The enhanced TruSense camera provides valuable data from the inside of the pipe to improve on-site pipe inspections.
• TruSense technology - Combined with a TruSense monitor, advanced sensors on the camera head can relay valuable information about the situation in the pipe, including digital self-leveling, high dynamic range, a TiltSense inclinometer and digital panning/zooming.
• Digital self-leveling - Ultra-smooth digital self-leveling keeps the image upright with no moving mechanical parts.
• High dynamic range - Provides superior clarity and detail of the inside of the pipe displayed on a TruSense monitor.
• TiltSense™ inclinometer - Shows the degree of tilt of the camera head if it is in the pipe and displays it on a TruSense monitor.
• Digital panning and zooming - Adds the ability to focus on a single point of interest.
• Navigation flexibility - Equipped with a rugged 0.7 in (18 mm) long, 25 mm diameter camera head and a pushcable with medium flexibility, this reel is flexible enough to navigate sharp bends, while rigid enough to cover long distances in 1 1/2 - 8" (40 - 200 mm) pipes.
• Traceable - A built-in 512Hz FleXmitter® probe maintains the flexibility to navigate narrow sections of pipe.

Technical data

• Camera diameter 25 mm
• Camera type Digital self-leveling
• Resolution 640 x 480 pixels
• Pipe capacity 1 1/2 to 8" (38 mm to 203 mm).
• Pushing cable length 61 m (200 ft)
• Push cable diameter 0.36 inch (9.1 mm)
• Flexibility cable Medium stiff
• Minimum bending radius push cable 76 mm (3 inches)
• Probe 512 Hz, FleXmitter®
• Weight 11.8 kg
• Length 20.4 inches (519 mm)
• Width 11.3 inches (288 mm)
• Height 560 mm (22 inches)
• Reel diameter 18.2 inches (462 mm)

Scope of delivery

• 67307 - SeeSnake connecting cable 33/10' (10 m/3 m)
• 17553 - Wrench, 25 mm