Rubi 35939 CYCLONE LEVEL SYSTEM Flat Strip 1 mm ( 2400pcs )

Rubi 35939 CYCLONE LEVEL SYSTEM Flat Strip 1 mm ( 2400pcs )

Special features

• The main function of the CYCLONE LEVEL SYSTEM is to prevent irregularities during the laying of ceramic tiles, both on floors and walls.
• The RUBI level systems are especially recommended when working with large format tiles. Although they can also be used with smaller formats (recommended from 30x30 cm). Always with the double bonding technique (buttering floating) and on a flat surface.
• The use of the CYCLONE LEVEL SYSTEM of RUBI, is very simple and intuitive. Moreover, the results are less sensitive to the skill and experience of the user than with other leveling systems on the market.
• The range of strips of the CYCLONE LEVEL SYSTEM has different thicknesses. Each joint width is easily identified thanks to the different colors.
• The caps are reusable. The large round base ensures even pressure at all times. The design of the CYCLONE LEVEL SYSTEM caps was specially conceived to maximize ergonomics during manual tightening (the CYCLONE LEVEL SYSTEM does not require any additional tools, neither for tightening, nor for removal) and for the highest possible visibility inside the cap itself (to be able to see, for example, if too much glue has been used).
• Removing the CYCLONE LEVEL SYSTEM is done by an impulse motion (with the foot or a hammer) and, as we said before, you don't need any additional tools for it.

Technical data

• Number of tile joint crosses per bag: 2400 ST