Airpress 79156 Tool trolley filled 217-piece 7 drawers

Airpress 79156 Tool trolley filled 217-piece 7 drawers

Features

• Tools storage can be done in the 217-piece tool trolley with 7 drawers.
• The set consists of the tool cart including tools.
• This tool cart comes equipped with sturdy handles with soft grip and non-slip composite.
• The corners have rubber covers.The tool cart is sturdy and stable.
• The four wheels, two of which swivel, make the tool trolley easy to move.
• The tool trolley has a brake so that the whole thing will not roll.
• The entire tool case can be closed by the central locking system.
• This tool cart is equipped with 7 drawers, 5 small drawers with a load capacity of 18 kilograms, 1 medium drawer with a load capacity of 20 kilograms and 1 large drawer with a load capacity of 25 kilograms.
• The drawers cannot be opened separately.
• In fact, this is protected by a safety mechanism.
• All drawers are equipped with reinforced guides and sliding mechanism with ball bearings.
• The tool trolley including tools weighs 80 kilograms.
• When empty, the tool cart weighs 51 kilograms.
• The dimensions of the tool trolley are 46.5 x 77 x 97 cm.
• The walls are perforated, so you can add accessories to the tool cart if necessary.
• The tools come in special toolbeds.
• These toolbeds are oil-resistant and durable.

Scope of delivery

Module 1

• Set of 17 pieces of ring wrenches: Sizes from 6 mm to 22
• Set of 8 pieces of bent ring wrenches: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 mm
• Set of 10 pieces of wrenches: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 24x27, 30x32 mm

Module 2

• 300g bench hammer with fiberglass handle, plastic hammer with fiberglass handle and 3 cold chisels width: 16, 18, 24 mm
• Pliers Set: 175 mm point pliers, side cutter175 mm and a 200 mm combination pliers
• Set of Pliers: Water Pump Pliers 250 mm and Grip Pliers 250 mm

Module 3

• Set of 8 screwdrivers: Straight: 6x38, 5x100, 4x100, 6x150 mm Cross: 6x38, 5x100, 6x100, 6x150 mm
• Set of 13 right-angle Torx wrenches: T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70
• 42 piece bit/wrench set consisting of: 10 piece set of ball socket wrenches : 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10 mm 1/4 ™ cap, long shank : 5, 6, 7, 8, 9, 10, 11, 12, 13 mm flat screw bits : 4, 5.5, 7 Phillips screwdriver bits : PH 1, PH 2, PH 3, PZ 1, PZ 2, PZ 3 Torx bits : T8, T10, T15, T20, T25, T27, T30, T40 imbus bits : 3, 4, 5, 6, 7, 8 mm

Module 4

• 19 piece 1/4" socket set: socket 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm joint, sliding piece extensions: 50 mm and 100 mm ratchet and a straight handle driver
• 31-piece 3/8 socket set: hex sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm long shank sockets: 16 and 21 mm Torx internal: E10, E11, E12, E14, E16, E18, E20 ratchet jointed slider extension pieces: 75 mm and 150 mm
• A set of 26 1/2" sockets: sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32 mm joint piece slide piece extensions: 125 mm and 250 mm ratchet