Alpim ALP002001Set High Tack Ultra Strong Adhesive Kit, White, 290 ml, 12-pack + Cleaner

Alpim ALP002001 High Tack Ultra-Strong Adhesive Kit, White, 290 ml, 12-pack + Cleaner

Special Features

• High-quality adhesive and construction sealant with high initial tack
• Equipped with a V-nozzle for easy vertical application
• Bonds immediately without support or clamping
• Adheres excellently without primer to most surfaces, even damp ones
• High mechanical strength
• High tensile strength
• Fast curing
• Remains permanently elastic
• Shrinkage-free
• Good weather and moisture resistance
• Can be painted over with most water-based and two-component paint systems
• No edge-zone staining on marble and natural stone
• Isocyanate-, solvent-, and silicone-free
• Neutral curing, virtually odorless
• Mold- and bacteria-resistant
• High absorption of acoustic vibrations

Technical Data

• Volume: 290 ml
• Base: polymers
• Color: white
• Processing temperature: 5°C to 40°C
• Extrusion rate @ 3 mm/4 bar: 20 g/min
• Flow resistance ISO 7390: < 2 mm
• 100% Modulus: 1.39 MPa N/mm²
• Tensile strength: 2.8 MPa N/mm²
• Density: 1.58 g/mL
• Skin formation at 23°C: 15 minutes
• Curing: 3 mm per 24 hours
• Hardness (ISO 868): 65 Shore A
• Elongation at break: 400%
• Movement absorption: 20%–25%
• Temperature resistance: -40°C to 90°C
• Freeze resistance during transport: Up to -15 ℃
• Shelf life: 18 months in unopened packaging. Store at temperatures between 5°C and 25°C
• Safety recommendations: Always read the safety information before use
• Certificates:
  • Emicode EC1 Plus
  • Emission Certificate M1

Usage

• For bonding stone, concrete, mirrors, glass, plaster, PU, PVC, hard plastics, enamel, ceramics, copper, lead, zinc, tin, aluminum, metals, alloys, stainless steel, HPL panels, and paint systems.
• Surfaces must be clean, free of grease, and structurally sound. Always test the surface for adhesion beforehand.
• Apply the adhesive in vertical grooves using the V-nozzle, allowing for ventilation. The distance between the ridges should be 10 to 20 cm. Then press the materials together until there is a gap of at least 2 to 3 mm between the material to be bonded and the substrate. Do not apply Alpim High Tack in dots! Due to its high initial tack, support during curing is not necessary in most cases.
• After use, hands can be cleaned with Alpim Cleaning Wipes.

Contents

• 12 x High Tack Ultra Strong Adhesive Kit, White, 290 ml, ALP002001
• 1 x Sealant Finishing Spray, Ready-to-Use, 500 ml ALP001002