Benning 044690 MM 7-2 Digital Multimeter TRUE RMS

Benning 044690 MM 7-2 Digital Multimeter TRUE RMS

High-end multimeter in ergonomic and rubber-coated 2K housing. For the most challenging measurement tasks in electrical, industrial, service and HVAC engineering. Electrical Engineering.

Special features

• LoZ voltage measurement with low input impedance for suppression of reactive voltages
• Measurement of the CP control signal (duty cycle/amplitude) of EV charging stations (wall boxes) for electric vehicles(requires the BENNING EV 3-2 test adapter, art. no. 044169 and adapter BNC - 4 mm jack, art. no. 10231627)Industry:
• TRUE RMS voltage and frequency measurement for frequency converters and loads with superimposed harmonics
• Measurement of the 4 mA to 20 mA current loop signal in process technologyService:
• AutoV function with automatic changeover (AC/DC) and measuring range selection for fast fault detection
• Visual and acoustic transit test with fast response time (< 100 µs) for locating faulty components, cable breaks and loose terminalsHVAC technology:
• µA measurement range for measurements on flame sensors (ionization current) and measurement of anode current (mA) of hot water boilers
• Measurement of temperature and flue gas temperature in heating, ventilation and air conditioning (HVAC)Characteristics:
• Duty cycle (work cycle): 0.1 % - 99.99 %
• highest measurement category CAT IV 600 V for maximum safety
• max. measuring accuracy in the DC voltage range: 0.03 %.
• AutoV function for automatic AC/DC voltage detection and measuring range selection
• Low input impedance (LoZ) for suppression of reactive voltages
• Low-pass filter (HFR-High Frequency Suppression) for measurements on inverters (motor controllers)
• Display HOLD and Auto-HOLD when the measured value is stable
• Integrated voltage sensor with 2 sensitivity levels for non-contact voltage indication and cable breakage monitoring
• Measurement bus protection (optical/acoustic) in the µA/mA and A range with warning in case of wrong range selection
• 1 kV HBC high performance fuse with high breaking capacity
• 5-digit LCD display with bar graph and backlightMeasurement functions:
• Voltage, current, resistance, continuity, diode test, frequency, capacitance, temperature
• Standard: IEC/EN 61010-1 (DIN VDE 0411-1)
• Dimensions: 193 x 89 x 51 mm (with protection case)
• Weight: 420 g (with protection case)
• Including rubber protection case with back stand and measuring lead holder, bag, high-quality silicone measuring leads with gold-plated 2 mm and 4 mm measuring tip (screw-on), wire temperature sensor, batteries (3 x 1.5 V micro AAA/IEC LR03) and operating instructions

Technical data

• Display size: 60,000
• Bar graph: Yes
• Backlight: Yes
• Accuracy: 0.03
• Voltage AC: 10 µV - 1000 V
• DC voltage: 10 µV - 1000 V
• Current AC: 0.01 µA - 10 A
• Current DC: 0.01 µA - 10 A
• Resistance: 0.01 Ohm - 60 MOhm
• Continuity: Yes
• Diode: Yes
• Frequency: 0.001 Hz - 1 MHz
• Capacitance: 0.01 nF - 10 mF
• Temperature: -200 °C to +1090 °C
• Voltage sensor: Yes
• Filter function: HFR filter (1000 Hz)
• Measuring range selection: Automatic/Manual
• Auto-Power-Off: Yes
• Memory function: HOLD/A-HOLD, MIN/MAX/AVG, PEAK/REL
• Measurement method: TRUE RMS
• Measurement category: CAT IV 600V/CAT III 1000V