CMT 710.260.11 Edge router 45° edge guide 27 x 5.5 mm shank 6 mm

CMT 710.260.11 Edge router 45° edge guide 27 x 5.5 mm shank 6 mm

Edge router 45?? with guide bearing

Features

• If you need to machine laminates quickly, precisely and efficiently and want to avoid having to change tools too often, then this is the ideal router
• If pre-set to maximum depth, perfectly square cuts are obtained
• If, on the contrary, it is slightly raised, it is possible to obtain chamfers with a 45° slope, which also have the characteristics to prevent splintering
• The milling cutter is equipped with a guide bearing, which allows to follow any profile without the help of the table guide
• These tools, of the highest quality, have twin milling heads and find a lot of uses
• They are ideal for finishing laminates thanks to the optimal shielded bearings that protect the pieces
• If you lower the cutter to the maximum cutting depth, you will obtain precise edges and corners in both hard and soft wood
• Chamfers are recommended on those parts of the furniture that are most subject to wear and tear, such as the table legs or all edges that are easily splintered or damaged

Specifications

• Milling cutter diameter D=27 mm
• Cutting height I=5,5 mm
• Bearing to be used 791.018.00
• Angle of incidence 45?
• Intake S=6 mm