CMT 914.817.11 31,7 mm curved radius cutter R=16 shank 12 mm

CMT 914.817.11 31,7 mm curved radius cutter R=16 shank 12 mm

• Personalize your panels, doors, cabinets, drawers and any other surface with a delicate decorative motif
• These milling cutters in integral tungsten carbide or with cladding efficiently work any type of wood or derivative
• We offer you a complete range of diameters with different cutting depths
• In order to obtain additional combinations, use our "milling cutter with bearing guide"
• For example, one can use a router with bearing and an original profile to make special drawers or panels
• If you fix the electro-milling machine on a bench with a guide, you can obtain shapes and grooves up to a depth of 31mm
• These cutters are also commonly used by billboard designers, toy manufacturers and hobbyists
• Safety recommendations: Pay particular attention if rather deep grooves are to be made
• Overloading the milling machine is useless both for you and for your tools
• The handles (or rods) must be made exclusively of wood with a regular grain structure and without defects
• When routing handles, the cut must be made at least twice
• In the case of hard wood, it is advisable to go over it several times
• High-grade widia steel
• 2 CUTTING POINTS
• 1 x frees

Specifications

• Cutter length L=58,8 mm
• Milling cutter diameter D=31,7 mm
• Cutting height I=18,5 mm
• Ronding Radius R=16
• Intake S=12 mm