CMT 955.005.11 Mitre cutter set 22,5° with straight shank 8 mm

CMT 955.005.11 Mitre cutter set 22,5° with straight shank 8 mm

• No more struggling with glue clamps at 22.5° joints
• Use this router set to make octagonal workpieces
• The 22.5° miter glue set ensures a tight and very strong connection
• There is no need to use a slat connection
• The two cutters in this CMT set are perfectly matched
• The use is simple
• The height adjustment of the cutters is not particularly critical
• Adjust your router table guide plates as shown in the drawing below
• After milling, apply glue to the wood and clamp the parts together using a simple strap

Specifications

• Milling cutter diameter D=37.3 mm
• Milling height I =22.2 mm
• Working height T = 9,5 / 19 mm
• Routing angle A= 22.5
• Intake S=8 mm