CMT 955.502.11 50.8 mm Drawer lock router bit 12 mm

CMT 955.502.11 50.8 mm Drawer lock router bit 12 mm

• The key to success for making quality drawers is to obtain robust inserts that fit together perfectly.
• The fastest and most accurate way to obtain these inserts is to use CMT plunge-cut cutters.
• To create inserts, follow the example shown below and don''t be afraid to add a distinctive touch to the front of the drawer (see illustration below).
• Attention: these cutters must only be used with electric routers or routers placed on a bench equipped with a guide.
• Helpful advice for drawer designers: quickly make the insertions according to the two illustrations below
• Mill the front with the internal part towards the work surface
• Mill the side with the internal part towards the guide at an angle of 90° to the work surface

Specifications

• Milling cutter diameter D=50,8 mm
• Cutting height I =12.7 mm
• Working height T = 15,87-25,4 mm
• Routing angle 90° and short 30
• Intake S=8 mm