Dynaplus 0289.13.41901 Decking screw XTREME AR-Bronze PK-60° +Cutting Point TX-25 5.0 x 50/25 mm - 1250 pieces

Dynaplus 0289.13.41901 Decking screw XTREME AR-Bronze PK-60° +Cutting Point TX-25 5.0 x 50/25 mm - 1250 pieces

Special features

• Dynaplus® decking screws with AR coating are the alternative to stainless steel decking screws
• The hardened steel decking screws with Anti-Rust coating are two(!) times stronger than stainless steel decking screws, making them the ideal screw for installing hardwood deck boards
• No problems with screws breaking off while screwing in
• Because of the special drill point with cross-sections and cutting edge, you can use these screws in many cases without pre-drilling.
• But for best results, it is wise to pre-drill the deck boards with a countersink drill bit
• The coated screws are highly corrosion resistant and have the very highest corrosivity class; C4
• The AR coating is composed of three thin layers of organic coating on top of the electrolytic zinc layer which provides very good adhesion
• Should the coating still be slightly damaged when screwing in? No problem; the coating can repair minor damage itself so that the AR coating provides permanent corrosion protection for the screw.
• The sharp milling ribs under the extra small head provides a tight finish to the decking
• The extra large and deep TX drive ensures optimum power transfer from the bit to the screw and makes screwing in easy
• These screws are packed in a convenient plastic bucket, as bulk packaging
• The recycled plastic bucket is convenient and use, has a handle for lifting and saves you a lot of cardboard waste when you start using larger numbers of screws
• Also packed in the bucket are 2 bits, the well-known color-coded Dynaplus bits that make a perfect combination with our torx screws
• For user-friendly and durable installation of wooden decking boards, we have special rubber T-pieces and decking pads in the range

Technical data

• Diameter: 5 mm
• Length: 50 mm
• Length of thread: 25 mm
• Drive: TX-25
• Milling ribs: External
• Drill point type:Cut point type-17|Cross-sections|knurled thread
• Wokkel: yes
• Thread version: Part thread
• Model head: Flat head 60°
• CE Standard: 14592
• Material: carbon steel
• Surface Treatment: AR Coating
• Surface treatment color: Bronze
• Lubricant: BASF
• Packaging type: Bucket
• Package contents number: 1250 piece(s)