Einhell 4173193 set GC-WW 6538 Set of Pressure Hidrobrox Pumps

Einhell 4173193 set GC-WW 6538 Set of Pressure Hidrobrox Pumps

The Einhell GC-WW 6538 Kit is a powerful and practical hydrophore pump that can serve you in a wide range of pumping activities. For example, use the pump to transport clear water from cisterns, wells and shafts. This way you can supply watering systems, toilet flushes and similar machines. For a large delivery capacity, this Pressure Tank Unit is equipped with a powerful 650W motor. This motor provides a delivery capacity of up to 3,800 litres per hour, a head up to 36 m, a suction height up to 8 m and a maximum operating pressure of 3.6 bar. It is recommended to use the Pressure Tank Unit with clear water, which is not warmer than 35° Celsius. A long operating life of the machine is ensured by a steel tank/pressure vessel with a capacity of 20 L. The machine features a solid suction and pressure connection on the pump housing, to which hoses can be connected very seamlessly. The suction connection is suitable for hoses with a diameter of 33.3 mm (1 inch female thread) and the pressure connection for hoses with a diameter of 33.3 mm (1 inch female thread). The machine has an integrated pressure switch that activates the pump when the pressure becomes too low and switches it off when there is sufficient pressure again. So you have sufficient reserves for the hydrophore pump a long time to use. After using the machine, the accumulated condensate in the tank can be removed from the machine via a water drain plug. The tank can be filled before use with an easily accessible water filler plug. While using the machine, you can keep an eye on the operating pressure via the integrated pressure gauge on the hydrophore pump. The pressure is then adjustable via the pressure switch on the hydrophore pump. The machine comes with a suction hose of 7 m

Features

• Pressure switch
• Including pressure gauge
• Capacity tank/pressure vessel: 20 L
• Water filler plug
• Water drain plug
• Supplied with a 7 m suction hose

Specifications

• Power supply: 220-240 V | 50 Hz
• Power output: 650 W
• Max. Supply capacity: 3800 L/h
• Max. Head: 36 m
• Max. Printing: 3.6 bar
• Max. Suction height: 8 m
• Max. Water temperature: 35 °C
• Max. Switch-on pressure: 1.5 bar
• Max. Shut-off pressure: 3 bar
• Suction connection: 33.3mm (R1 AG)
• Pressure port: 33.3mm (R1 AG)
• Tank capacity: 20 L
• Stub cable: 1.4 m | H07RN-F

Includes

• Hydrophore pump
• 1x Suction hose 7m
• Manual