Festool 576540 OF 1400 EBQ-Plus router Box-OF-S 8/10x Routing box

Now a total of 5 years warranty on Festool OF1400 machines

You receive an additional 2-year TOOLPLUS warranty on top of the Festool factory warranty. ToolNation TOOLPLUS Warranty: 2 years extra toolplus warranty on power tools.

Strengths OF1400

• Comfort cutter change with tilt key and ratchet principle - it doesn't get any quicker
• Tool-free copying ring changes
• Torsionally rigid base plate due to guide columns clamped on both sides
• Up to 99 Chip deflector and extraction hood for routing edges
• Snelrem en MMC elektronica
• Simple and 1/10 mm accurate adjustment of the milling depth

Applications OF 1400

• Rounding off edges, chamfering grooves and profiles
• Routing circles and cut-outs with the multi-routing template
• Using the guide system to cut grooves in the rear panel or mouldings
• Milling grooves in doors with the milling tool for noise and cold insulation
• Milling of mineral materials (max. milling 45 mm)

Specifications

• Power consumption 1400 W
• No load speed 10000-22500 min-1
• Collet diameter 6-12.7 mm
• Rapid cutting depth adjustment 70 mm
• Fine adjustment to routing depth 8 mm
• Dust extraction connection 27/36 mm
• Weight 4,5 kg

Includes

• Collet 8 mm
• Collet 12 mm
• Fine adjustment of the side fence
• Copying ring 30 mm
• Extractor fan above
• Chip catcher
• Milling box
• operating tool
• In SYSTAINER SYS3 M 337

Milling box contents

• Edge-free TC D12.7/NL25 KL
• Dowelling drill bit HW D5 x 30 Z
• Grooving cutter HW D18/30 with borehole
• Grooving cutter HW D10/20 with drill bit
• Round-off cutter HW D16,7/R2 KL
• Round-off cutter HW D25,5 R6,3 KL
• Round-off cutter HW D31,7/R9,5 KL
• Phase cutter HW D36/45 degrees KL
• Groove cutting disc HW D40 x 4
• Dovetail cutter HW D14,3/15