Fischer 30146 Channel anchor FHY M 8 zinc plated steel 25 pcs.

Fischer 30146 Channel anchor FHY M 8 zinc plated steel 25 pcs.

The Fischer Channel plate anchor FHY is a captive anchor made of galvanised steel. The FHY is inserted into the drilled hole by hand in the pre-insertion phase and then hammered into the surface of the building material. By applying the tightening torque, the cone is drawn into the spreader sleeve. In the hollow space the cone expands and in solid building material it clamps against the wall of the drilled hole. The Fischer Channel Anchor FHY is ideal for fixing pipes, cable ducts and ventilation ducts in hollow concrete slabs indoors.

Benefits

• The active principle of the anchor means that the FHY can be used in cavities or in solid materials up to 5 cm from the reinforcement. This guarantees optimal flexibility and user-friendly installation
• The embossed edge prevents the anchor sleeve from slipping into the cavity, thereby guaranteeing problem-free installation
• The optimised geometry minimises the energy required for heating and therefore allows use in extremely confined spaces. This allows for user-friendly installation
• The metric internal thread allows the use of standard screws or threaded rods for ideal adaptation to the intended use

Applications

• Channels >= C45/55

Building materials

• The FYH is suitable for the front insertion mounting
• Insert the steel sheet anchor FHY by hand into the hole and tap into the hole flush with the surface of the anchor base using the hammer
• To be able to spread, the sleeve anchor FHY must be able to move against the mounting piece
• By applying the tightening torque, the cone is drawn into the spreader sleeve, the sleeve spreads out in the hollow space or tightens in solid material against the wall of the borehole

Specifications

• DIBt approval : Relevant
• Borehole diameter : 12 mm
• Plug length : 43 mm
• Draad : M 8
• Min. drill hole depth : 60 mm
• Min. screw depth : 43 mm
• Contents : 25