Fischer 41902 Injection sleeve plastic FIS H 16 x 85 K 50 pieces

Fischer Injection sleeve plastic FIS H 16 x 85 K 41902 50 pieces

Special features

The versatile fixing system with injection sleeves for masonry made of perforated brick. The fischer Injection Sleeve FIS H K plastic is the system component of choice for use with the fischer Injection Mortar in masonry made of perforated brick. For this, the injection sleeve is inserted into the drilled hole and filled with mortar from the bottom of the injection sleeve. When the anchor rod or impact anchor with internal thread is inserted, the mortar is pushed through the grid structure and bonds appropriately with the perforated brick. As a result, the load is transferred to the building material. Using the injection sleeve, non-load-bearing layers can also be bridged.

Advantages

• The lattice structure of the injection sleeve FIS H K is matched to the injection mortar FIS V and ensures economical mortar consumption with an optimum connection of the mortar to the walls of the boreholes.
• The centering wings align the fastener ideally in the injection sleeve and allow the use of different diameters of threaded rods.
• Barbs hold the injection sleeve firmly in the borehole, enabling trouble-free overhead mounting.
• The geometry of the anchor sleeves allows bridging non-load-bearing layers for easy and simple installation. Please observe the approvals of the respective injection mortar.

Characteristics

• Grid structure reduces mortar consumption.
• The injection sleeves allow an optimally fitting connection in perforated stone.
• The centering wings secure anchor rods of different diameters. This reduces complexity and inventory management.
• Weather hook: when mounted overhead, these do not fall out of the drill hole.
• ETA approval.

Applications

• Anchors in perforated masonry with Injection Mortar FIS V.

Building Materials

• Approved for: Perforated brick, Light concrete hollow brick, Concrete hollow brick, Perforated sand-lime brick, Solid sand-lime brick, Solid brick
• Also suitable for: Perforated pumice NoHoBo floor Solid pumice and other solid building materials
• The details (building materials, taxes, etc.) of the available approval apply.

Approval

• ETA-10/0383 ETA-10/0383 ETA-15/0263 DoP No. 0026 DoP No. 0126 DoP No. 0756-CPD-0361

Assembly

• The injection sleeve FIS H K can be used depending on the application with the injection mortars FIS V, FIS V HIGH SPEED, FIS V LOW SPEED. The FIS P can be used without approval.
• In combination with injection sleeves and threaded rods FIS A or impact anchors with internal threads FIS E, the system is suitable for pre-pitch mounting.
• To do this, the injection sleeve is inserted into the borehole and filled with injection mortar from the bottom of the injection sleeve.
• When the fastener is screwed in, the mortar is pushed through the lattice structure of the injection sleeve and bonds appropriately with the anchoring substrate. The load is appropriately dissipated over the entire surface.

Technical data

• Approval
• Drill hole diameter d0 16 [mm]
• Min. drill hole depth h1 95 [mm].
• Min anchoring depth lift 85 [mm].
• Suitable for FIS A M8-M10, FIS E M6-M8
• Mortar quantity per sleeve 12 [shell pieces].

Standard included

• 50 pieces