Fischer 44110 Nail anchor FNA II 6 x 30 M 6 x 41 with metric thread (without nut and washer) ev 100 pcs

Fischer 44110 Nail anchor FNA II 6 x 30 M 6 x 41 with metric thread (without nut and washer) ev 100 pcs

The threaded FNA II 6 nail anchor (without nut) is made of galvanized steel. The FNA II is inserted into the pre-insertion with just a few taps, thus saving time. When loaded, the FNA II automatically expands. The cone is drawn into the spreader clip and strains against the wall of the drilled hole. The threaded FNA II nail fixer is mainly used for fixing metal clamps for pipes and tubes in interior construction.

Benefits

• Easy disassembly of the fire resistant plate without damaging it
• Reusability of the fire resistant plate
• Safe anchoring especially under vibration, wind, suction and pressure conditions
• Low anchoring depth (30 mm)
• Convenient mounting without mounting aid with controlled tightening torque
• Approved system that has been tried and tested millions of times

Applications

• Concrete C12/15 to C50/60, cracked and uncracked
• For multiple fixings of non-load bearing systems

Building materials

• The washer significantly increases the tractive force and simultaneously prevents damage to the plate during disassembly
• Dismantling by simply pinching off the nail head thanks to the special 2-position pliers
• For fast assembly use the compressed air mounting aid (art. no. 093731)

Specifications

• Approval : relevant
• Borehole diameter : 6 mm
• Min. borehole depth for through hole mounting: 40 mm
• Plug length : 41 mm
• Draad : M 6
• Wrench size : 10 mm
• Content : 100