Fischer 44122 Nail anchor FNA II 6 x 30 /5 stainless steel A4 100 pcs

Fischer 44122 Nail anchor FNA II 6 x 30 /5 stainless steel A4 100 pcs

The Fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is inserted into the through hole assembly with just a few taps, thus saving time. When loaded, the FNA II spreads automatically. The cone is drawn into the spreader clip and strains against the wall of the drilled hole. The Fischer nail anchor FNA II 6 with nail head is mainly used for fixing mounting rails and substructures made of wood or metal outdoors.

Benefits

• The special active principle allows a simple stroke mounting and thus a shorter processing time
• The extremely short anchor depth avoids the risk of encounters with reinforcement and creates the conditions for a problem-free installation
• The optimised spreader clamp ensures a hold during insertion in the borehole and prevents it from falling out during overhead installations
• The massive shaft diameter guarantees a high load capacity and thus offers an extremely high level of safety
• A number of head shapes enable the attachment of various attachments and ideal adaptation to the intended application

Building materials

• The FNA II with nail head is suitable for through hole mounting
• When loaded, the FNA II nail anchor fitted automatically spreads out. The cone is drawn into the spreader clip and strains against the wall of the drilled hole
• Available mounting aids: FNA S-SBO for placing on the drill bit, FNA S-SDS for serial assembly using a rotary hammer, FNA S-H for manual application of mounting rails

Specifications

• Approval : relevant
• Borehole diameter : 6 mm
• Min. borehole depth for through hole mounting : 45 mm
• Plug length : 40 mm
• Max. thickness of attachment : 5 mm
• Head Ø : 13.0 mm
• Content : 100