Fischer 44126 Nail anchor FNA II 6 x 25 H with hook ev 50 pcs

Fischer 44126 Nail anchor FNA II 6 x 25 H with hook ev 50 pcs

The Fischer nail anchor FNA II 6 with hook is made of galvanized steel. The FNA II is inserted into the pre-anchor assembly with just a few taps, thus saving time. When loaded, the FNA II spreads automatically. The cone is drawn into the spreader clip and strains against the wall of the drilled hole. The Fischer nail anchor FNA II 6 with hook is mainly used for fixing pipes and supports in interior construction.

Benefits

• The special active principle allows a simple stroke mounting and thus a shorter processing time
• The extremely short anchor depth avoids the risk of encounters with reinforcement and creates the conditions for a problem-free installation
• The optimised spreader clamp ensures a hold during insertion in the borehole and prevents it from falling out during overhead installations
• The massive shaft diameter guarantees a high load capacity and thus offers an extremely high level of safety
• A number of head shapes enable the attachment of various attachments and ideal adaptation to the intended application

Applications

• Concrete C12/15 to C50/60, cracked, for multiple fixings of non-load bearing systems
• Solid sand-lime brick
• High density natural stone
• Gable plates

Building materials

• FNA II with nail head is suitable for push-through mounting. FNA II M6h is suitable for both push through and through fixing. FNA II OE and H are suitable for push through mounting
• The installed FNA II nail anchor automatically spreads under load. The cone is drawn into the spreader clamp, thus clamping it to the borehole wall
• Available mounting aids: FNA S-SBO for sliding into the drill, FNA S-SDS for serial assembly with a rotary hammer, FNA S-H for manual installation of mounting rails

Specifications

• Borehole diameter : 6 mm
• Min. borehole depth : 35 mm
• Inner diameter hook or eye : 10 Ø mm
• Contents : 50