Fischer 44884 High-performance anchor FH II 12/10 S with hexagonal head ev 50 pcs

Fischer 44884 High-performance anchor FH II 12/10 S with hexagonal head ev 50 pcs

The interlocking anchor for fixings with an attractive design in cracked concrete. The fischer Safety Anchor FH II S with Hexagonal Head is a sleeve anchor made from galvanised steel. The anchor is inserted in the time-saving push-through assembly. When tightening the anchor, the cone is drawn into the spreader sleeve and strains against the wall of the drilled hole. The black plastic ring prevents the anchor from rotating and picks up the sealing lip. The anchor is then pulled into the anchoring ground. The fischer Safety Anchor FH II S with Hexagonal Head is particularly suitable for fixing brackets, steel constructions and cable ducts in cracked and uncracked concrete.

Benefits

• The anchor design allows for different head shapes for attachment points with a demanding visual appearance
• The optimal interaction of screw shank and sleeve enables an extremely high transverse load capacity. As a result, fewer fastening points are required
• The international approvals guarantee optimum safety and the best performance. Applications in earthquake zones (Seismik C1) are also covered by these approvals
• The optimized geometry reduces the effort during installation and thus ensures a force-saving assembly. The use of hollow drills is regulated in the approval
• When using hollow drills with extraction, the borehole does not need to be cleaned

Applications

• Railings, Stairs, Consoles, Steel, structures, Ladders, Cable trays, Machinery, Fencing, Facade systems, Grids, Building materials
• Approved for: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: Concrete C12/15 High density natural stone
• Approval DoP No. 0756-CPD-0295 No. 0020 - EN

Montage

• The FH II is suitable for push-through mounting
• When torque is applied, the cone is pulled into the spreader clamp, clamping it against the borehole wall
• The black plastic ring prevents rotation during anchorage and acts as a zone that absorbs the torque slip such that the attachment is pulled onto the anchor base
• Available head shapes for flexible design solutions: Countersunk head (type SK - for flat surfaces and fixing points that can then be secured against theft), hexagonal bolt (type S), bolt version with nut and washer (type B) and cap nut (type H)

Specifications

• Drill hole diameter d0 12 [mm]
• Min. borehole depth for through hole mounting h2 90 [mm]
• Plug length l 90 [mm]
• Max. thickness of attachment t fix 10 [mm]
• Draad M 8
• Wrench size SW 13 [mm]

Includes

• 50 pieces