Fischer 50263 Anchor rod RG M 8 x 110 stainless steel A4 10 pcs.

Fischer 50263 Anchor rod RG M 8 x 110 stainless steel A4 10 pcs.

The proven threaded rods for use with mortar cartridges or injection mortar indoors. The fischer Threaded Rod RG M is made of stainless steel. The threaded rod is a system accessory for the various fischer mortar cartridges or injection mortar. For individual fastenings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the fischer Threaded Rod RG M is inserted using a rotary-tapping hammer. During installation, the mortar cartridge is broken, mixed and the mortar mass activated. During installation with the injection mortar, the anchor rod is manually pushed into the drilled hole by means of slight twisting movements. The system is particularly suitable for efficient fastening of machines, steel structures and support legs indoors.

Advantages

• The wide range of the RG M from M8 to M30 enables a wide application spectrum and thus offers a high degree of flexibility.
• The many types of approved steels for RG M allows the use all corrosion resistance classes and provides the utmost safety in applications.
• Please observe the approvals of the respective glass capsules or mortar.

Characteristics

• In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete.
• The threaded rods with beveled edge and 6-sided for easy assembly with pre-portioned glass capsule.
• Galvanized steel for indoor use.

Approval

• ETA-02/0024 DoP No. 0007 DoP No. 0007 - EN DoP No. 0072 DoP No. 0094 DoP No. 0094 - EN DoP No. 0756-CPD-0300 DoP No. 0756-CPD-0301 DoP No. 0756-CPD-0490

Assembly

• By virtue of the beveled jug, the RG M threaded rod is particularly suitable for use in conjunction with the glass capsules.
• The threaded rod RG M is inserted using a drill hammer and the corresponding assembly tool in a rotary-tapping motion.
• During application, the capsule is broken by the beveled edge of the RG M, mixed and the mortar activated.
• The use of injection mortar is also possible. In this process, the threaded rod is pressed to the bottom of the borehole by hand, turning slightly.

Technical data

• Drill hole diameter d0 10 [mm]
• Wrench size (hex) 6kt SW 5 [mm].
• Wrench size (hex nut) SW 13 [mm].

Includes

• 10 pieces