Fischer 507580 Fastening anchor FBN II 10/30 hot dip galvanised

Fischer 507580 Fastening anchor FBN II 10/30 hot dip galvanised

Features

• The efficient fixing of hot-dip galvanised steel in uncracked concrete
• With the approval document (ETA), the hot-dip galvanised steel version is approved for outdoor use with a variable service life, depending on the environment and corrosion conditions
• With the standard anchoring depth, the FBN II achieves the highest load capacity
• That means fewer attachment points and smaller anchor plates
• Using the reduced anchoring depth reduces the depth of the drill hole and simplifies installation
• The long threads compensate for component tolerances
• The FBN II is also suitable for remote mounting
• This increases the flexibility
• Easy assembly due to fewer hammer blows and minimal slippage
• The standard anchoring depth ensures the greatest load capacity
• This requires fewer mounting points and smaller anchor plates
• Reduced anchoring depth reduces the depth of the drill hole
• This reduces the assembly effort and increases flexibility
• The long thread allows compensation of tolerances of components and remotely mounted structures, thus increasing flexibility
• Fewer hammer blows and minimal tightening slippage make assembly noticeably easier
• The FBN II is approved for use in dry indoor areas
• The insertion ridge protects the screw thread from damage and thus saves time during assembly and disassembly of the assembly piece

Technical data

• Approval: Relevant
• Drill hole diameter: 10 mm
• Min. Drill hole depth for push-through assembly: 98 mm
• Plough length: 106 mm
• Max. useful length lift,stand/lift,red: 30/40 mm
• Thread: M 10 x 66 mm
• Wrench size : 17 mm

Building materials

• Concrete C20/25 to C50/60, uncracked
• Concrete C12/15
• High density natural stone

Includes

• Pieces per pack: 50