Fischer 519780 Hollow wall plug HM 4 x 32 H with Framing square 50 pieces

Fischer 519780 Hollow wall plug HM 4 x 32 H with Framing square 50 pieces

The versatile metal hollow wall plug with straight hook.

Features

• The fischer metal hollow wall plug HM-H is a versatile hollow wall plug with straight hook for all sheet metal materials
• The dowel is inserted into the pre-insertion with the fischer hollow wall plug pliers HM-Z 1
• The pliers are used to pull the plug into the hollow space behind the sheet metal
• The arms spread out behind the sheet material and distribute the forces over a large surface
• Manual assembly is also possible as an alternative
• The fischer metal hollow wall plug HM-H is particularly suitable for securing lights, paintings and light wall assemblies in interior construction

Benefits

• Due to its extensive range, the HM is suitable for sheet metal thicknesses of 3-50 mm, allowing it to be used for a wide variety of applications
• The attachment can be mounted and dismounted several times due to the metric female thread
• This makes the HM very flexible
• The spreading arms of the HM provide a large contact surface allowing for high loads
• The barbs under the collar of the plug penetrate the plate material, which prevents the plug from rotating in the drilled hole and guarantees a safe mounting

Characteristic properties

• Complete with hook. Flexible in assembly: The screw can be loosened and tightened again
• Does not rotate: The wings (claws) on the edge of the dowel keep it firmly in the sheet metal
• Holds even heavy objects in sheet metal due to the large contact area of the spreader arms
• Suitable for pre-pitch mounting

Building materials

• Gypsum board and gypsum fibreboard Channel boards Lightweight sheets of wood wool Particle board Plywood

Applications

• Paintings Lamps Small shelves Towel racks Mirror cabinets Curtain rails Substructures

Montage

• The HM hollow wall plug is suitable for push-on installation
• The attachment should be selected according to the thickness of the sheet material so that the arms can spread over as large a surface area as possible
• During assembly the arms spread out and press themselves on the back of the sheet material
• The HM can be mounted with a pair of mounting pliers
• When using a cordless screwdriver or screwdriver, first remove the pre-mounted screw
• When screwing in and spreading the arms, the attachment or sheet thickness should not exceed 6 mm in order to prevent the hollow wall plug from rotating in the drilled hole

Specifications

• Borehole diameter: 8 mm
• Plate thickness 3 - 13 mm
• Plug length 32 mm
• min. drill hole depth 45 mm

Includes

• 50 pieces